User Manual

Using OmniBook Accessories
Using the CD-ROM Drive
1-13
If you’re using Windows for Workgroups
1. Save your work—you’ll be resetting the OmniBook.
2. If necessary, remove the floppy drive or super battery from the OmniBook.
3. Slide the CD-ROM drive into the OmniBook until it clicks into place.
4. Press the reset button.
Insert a ball-point pen tip or other slender object into the reset-button hole in the
left side of the case, below the ac adapter socket. Push in momentarily—the system
resets and reboots.
Reset button