User's Manual

ManualsBrandsHP ManualsAll in One PrinterHP Officejet t45 All-in-One Printer

Polaris (US)

.........................................................................................................................................

3-7

HP Company Confidential -

3/18/99 1:56 pm

Adjusting Menu Settings

To adjust settings from the front panel, press the appropriate button

sequence shown in the left margin. Then use the arrows to view

choices. With your choice displayed, press

Enter.

The on the display indicates the current setting.

Temporary settings show on the display under the date and time and

are explained in “Adjusting Front Panel Settings” on page 3-3.

Copy Paper Type

is a temporary setting which reverts to the

default after two minutes. To make the current setting the default,

press

Menu, 1, 2.

Set Copy Defaults

sets as default the current settings you set for

Copy Quality, Reduce/Enlarge, and Copy Paper Type.

Copy Quality (T45 models only)

(

Note:

To set copy quality on T65 models, press

Copy Quality

on the

front panel.)

Copy Quality affects copy speed and quality and has three settings:

Fast:

Fastest speed, good quality, uses less ink

Normal:

Good speed, high quality, recommended for most jobs

Best:

Best quality, slowest speed

This is a temporary setting which reverts to the default after two

minutes. To make the current setting the default, press

Menu, 1, 2.

Reduce/Enlarge (T45 models only)

(

Note:

To reduce or enlarge on T65 models, press

Reduce/Enlarge

on the front panel.)

This is a temporary setting which reverts to the default after two

minutes. To make the current setting the default, press

Menu, 1, 2.

Press this

sequence:

1, 1

1, 2

1, 3

1, 4