Reference Guide

load paper
17
hp officejet d series
load paper
Following is the basic procedure for loading paper. There are specific
considerations for loading certain types of paper, transparency film, and
envelopes. After you review this procedure, see tips for loading other types
of paper in the main tray on page 20 and load envelopes on page 19.
For best results, adjust the paper settings each time you change paper types
or paper sizes. For more information, see choose the paper tray and set the
paper type on page 22.
If you have the HP 250-sheet plain paper tray, you can load paper into both
the main paper tray and the 250-sheet plain paper tray. If you have the
250-sheet plain paper tray, you should use it for plain paper only. Please
refer to the Accessories guide that comes with the paper tray for information
about installing the tray, loading paper, and adjusting paper-width and
paper-length guides.
Caution! You must also have the two-sided printing accessory
installed to use the 250-sheet plain paper tray.
to load the main paper tray
1
Lift the output tray up until it catches in the raised position, and slide
the paper-width and paper-length guides to their outermost positions.