Reference Guide

maintain your hp officejet
70
hp officejet d series
3
When the prompt appears asking if you want to override the ink level
gauge, press 1 for Yes, or 2 for No.
to override the ink level gauge for the tri-color ink cartridge
1
Press and at the same time, then release.
2
On the keypad, press in order, 4, 5, 6.
3
When the prompt appears asking if you want to override the ink level
gauge, press 1 for Yes, or 2 for No.
Always install an ink cartridge before performing an Ink Level Gauge
override.
restore factory defaults
You can restore the original factory settings to what they were when you
purchased your HP OfficeJet. Choosing to restore your factory defaults
restores all settings, except copy settings, speed-dial entries, date, and fax
header information.
You can perform this process from the front panel only.
1
Press Menu.
2
Press 7, then press 5.
This selects the Status and Maintenance menu, then selects the Restore
Factory Defaults option.
The factory default settings are restored.
set the country or language
Usually, the language and country are set when you install the HP OfficeJet.
If you need to reset either the country or the language, use the following
procedure.
Tip! If you accidentally choose the wrong language and are
unable to read the front-panel display, simply follow the first
3 steps using the keypad to choose the correct language. You
may also consider printing a Self-Test report to identify the
country and language that have been selected.
1
Press Menu.
2
Press 7, then press 7, then press Enter.
This selects the Status and Maintenance menu, then selects the Set
Country and Language option.
3
To select the language, you can do the following:
– Press until the desired language appears.
– Wait until the desired language appears on the front panel
display.