Reference Guide

maintain your hp officejet
64
hp officejet d series
Caution! If you ignore the messages and do not replace the
ink cartridges, eventually the HP OfficeJet will stop working
completely to avoid damaging the printheads.
See the Support and Specifications booklet for information on ordering
replacement ink cartridges.
1
Turn on the unit, then open the print-carriage access door by lifting the
handle until the door locks into place.
The print carriage moves to the center of the unit.
2
After the carriage stops moving, press the gray button to release the
ink cartridge, then pull it up and out of its slot.
Caution! To avoid damaging the printer, remove an ink
cartridge only when a replacement is available. If an ink
cartridge is removed without being replaced:
– Close the print carriage and the print-carriage access door.
– Replace the ink cartridge within 24 hours.
– Never remove an ink cartridge and a printhead at the same time.
3
Remove the new ink cartridge from its packaging and, being careful to
touch only the black plastic, gently remove the plastic tape.