Reference Guide

work with printheads and ink cartridges
63
hp officejet d series
6
Push the new printhead firmly down into the appropriate slot using the
printhead handle. Do not touch the printhead tower, and do not
remove the printhead handle.
7
Move the print carriage latch down, and make sure the loops catch
the hooks. Snap the latch into place, then close the print carriage
access door.
8
After the message appears in the front-panel display, press Enter to
align the printheads.
A page prints to confirm alignment. You can discard or recycle this
page. If the page does not appear, see the Troubleshooting help,
which you access from the HP Director.
handle ink
cartridges
Before you replace or clean an ink cartridge, you should know the part
names and how to handle them.
replace the ink
cartridges
Front-panel display messages appear under the following conditions to let
you know that you should replace your ink cartridges.
•Low ink levels
• Ink cartridges are approaching their expiration dates
Copper
contacts
Release button
Plastic tape
Do not touch the copper contacts, and hold the
cartridge away from you as you remove the plastic
tape so the ink does not spill on you or your clothing.