Reference Guide

maintain your hp officejet
62
hp officejet d series
Caution! To avoid damaging the printer, remove a printhead
only when a replacement is available. If a printhead is
removed without being replaced:
– Close the print carriage and the print-carriage access door.
– Replace the printhead within 24 hours.
– Never remove an ink cartridge and a printhead at the same time.
3
Remove the old printhead by lifting the printhead handle and pulling
upward.
4
Remove the new printhead from its packaging and, being careful to
touch only the black plastic, gently remove the plastic tape.
Caution! Do not touch the copper contacts, the printhead
tower, or the ink nozzles.
removing the plastic tape from the printhead
5
Match the color on the top of the printhead to the color on the
printhead carriage.
Pull the printhead handle upward
Plastic tape
Printhead tower
Copper contacts
Ink nozzles