User's Manual

Embedded web server specifications
Requirements
●
A TCP/IP-based network (IPX/SPX-based networks are not supported)
●
A web browser (either Microsoft Internet Explorer 7.0 or higher, Mozilla Firefox 3.0 or higher,
Safari 3.0 or higher, or Google Chrome 5.0 or higher)
●
A network connection (cannot be used with a printer connected to a computer using a USB
cable)
●
An Internet connection (required for some features)
NOTE: You can open the embedded web server without being connected to the Internet.
However, some features are not available.
NOTE: The embedded web server must be on the same side of a firewall as the printer.
Paper specifications
Use these tables to determine the correct paper to use with your printer, and determine what features
work with your paper.
●
Understand specifications for supported paper
●
Set minimum margins
●
Guidelines for printing on both sides of a page
Understand specifications for supported paper
Use the tables to determine the correct paper to use with your printer, and to determine what features
work with your paper.
●
Understand supported sizes
●
Understand supported paper types and weights
Understand supported sizes
TIP: If you are using the duplexer, the minimum top and bottom margins must be at least 16 mm
(0.63 inches).
Paper size Input tray ADF Duplexer
Standard paper sizes
10x15cm*
2L*
U.S. Letter (216 x 279 mm; 8.5 x 11 inches)
8.5 x 13 inches (216 x 330 mm)
U.S. Legal (216 x 356 mm; 8.5 x 14 inches)
ENWW Printer specifications 167