User's Manual

Make sure you have paper loaded in the input tray.
2. Load your original face down on the right front corner of the glass or face up in
the document feeder tray.
If you use the document feeder tray, place the page so that the top of the
document is inserted first.
3. In the Copy area, press Menu and make any needed changes to the copy settings.
4. In the Copy area, press Menu until Set New Defaults appears.
5.
Press
to select Yes.
6. Press OK to accept the settings as the new default settings.
7. Press Start Copy Black or Start Copy Color.
The settings you specify here are only saved on the HP All-in-One. They do not adjust
the settings in the software. You can save your most frequently used settings by using
the HP Image Zone software that came with your HP All-in-One. For more
information, see the onscreen HP Image Zone Help.
Stop copying
➔
To stop copying, press Cancel on the control panel.
Chapter 7
66 HP Officejet 7200 All-in-One series
Use the copy features