User's Manual

Tip For the best quality when copying a photo, load photo paper in the
input tray.
2. Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3. In the Copy area, press Menu until Enhancements appears.
4.
Press
to select the Photo enhancement setting, and then press OK.
5. Press Start Copy Color.
Make a poster
You can use the Poster feature to create an enlarged copy of your original in sections
and assemble them into a poster.
1. Make sure you have paper loaded in the input tray.
Tip If you are copying a photo into a poster, use full-size photo paper to
achieve the highest quality copy.
2. Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
3. In the Copy area, press Reduce/Enlarge until Poster appears, and then press OK.
4.
Press
to select a page width for the poster.
The default poster size is two pages wide.
5. Press Start Copy Black or Start Copy Color.
After you select the poster width, the HP All-in-One adjusts the length
automatically to maintain the proportions of the original.
Tip If the original cannot be enlarged to the selected poster size because
it exceeds the maximum zoom percentage, an error message appears
that tells you to try a smaller width. Select a smaller poster size and make
the copy again.
6. After the poster has printed, trim the edges of the sheets and tape the sheets
together.
Chapter 7
64 HP Officejet 7200 All-in-One series
Use the copy features