Manualshelf

User's Manual

ManualsBrandsHP ManualsAll in One PrinterHP Officejet 6815 e-All-in-One Printer
81828384858687888990
Set up the printer on your wireless network
Use the Wireless Setup Wizard from the printer control panel display to set up wireless
communication.
NOTE: Before you proceed, go through the list at Before you begin.
1. From the printer control panel, touch Setup.
2. Touch Network Setup.
3. Touch Wireless Settings.
4. Touch Wireless Setup Wizard.
5. Follow the display instructions to complete the setup.
If you are already using the printer with a different type of connection, such as a USB connection,
follow the instructions in
Change the connection type to set up the printer on your wireless network.
Change the connection type
After you have installed the HP printer software and connected the printer to your computer or to a
network, you can use the software to change the connection type (for example, from a USB
connection to a wireless connection).
NOTE: Connecting an Ethernet cable turns off the wireless capability of the printer.
To change from an Ethernet connection to a wireless connection (Windows)
1. Remove the Ethernet cable from the printer.
2. Run the Wireless Setup Wizard to make the wireless connection. For more information, see
Set
up the printer on your wireless network.
Open the printer software after the installation. For more information, see
Open the HP printer
software (Windows).
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at
Before you begin.
1. Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer
name, and then click Utilities.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar,
select the printer name, and then click Utilities.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder of your printer.
2. Click Printer Setup & Software.
3. Select Convert a USB connected printer to wireless. Follow the on-screen instructions.
To change from a USB or Ethernet connection to a wireless connection (OS X)
Before you proceed, go through the list at
Before you begin.
72 Chapter 8 Network setup ENWW