Manualshelf

User's Manual

ManualsBrandsHP ManualsAll in One PrinterHP Officejet 6812 e-All-in-One Printer
81828384858687888990
1. Connect the printer to your wireless network.
2. Open System Preferences.
3. Depending on your operating system, click Print & Fax, Print & Scan, or Printers & Scanners in
the Hardware section.
4. Select your printer in the left pane and click - at the bottom of the list. Do the same for the fax
entry, if there is one for the current connection.
5. Open HP Utility.
HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level of the
hard disk.
6. Choose Devices > HP Auto Wireless Connect and follow the prompts.
Learn more about how to change from a USB to wireless connection. Click here to go online
for more information. At this time, this website might not be available in all languages.
To change from a wireless connection to a USB or Ethernet connection (Windows)
●
Connect the USB or Ethernet cable to the printer.
To change from a wireless connection to a USB or Ethernet connection (OS X)
Add the printer to the print queue.
1. Open System Preferences.
2. Depending on your operating system, click Print & Fax, Print & Scan, or Printers & Scanners in
the Hardware section.
3. Click + below the list of printers at the left.
4. Select the printer from the list of detected printers, and click Add.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test
report provides information about the printer status, hardware (MAC) address, and IP address. If the
printer is connected to a network, the test report displays details about the network settings.
To print the wireless test report
1.
From the printer control panel, touch
(the Wireless button), and then touch (the Settings
button).
2. Touch Print Reports
3. Touch Wireless Test Report.
Turn on or off the wireless capability of the printer
The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is
on.
NOTE: Connecting an Ethernet cable to the printer automatically turns off the wireless capability
and the Wireless light.
ENWW Set up the printer for wireless communication 73