Setup Poster

3 • HP all-in-one
8
9
10
7
Press the On button
Open access door
Remove tape from both cartridges
a After you press the On button, the green light fl ashes, and then becomes solid.
This may take up to a minute.
b Wait for the print cartridge prompt before continuing.
Lift the access door until it stops. Make sure the print
carriage moves to the right side.
Pull the pink tab to remove the tape from both print
cartridges.
On
Do not touch the copper-colored contacts or
retape the cartridges.
Connect the supplied phone cord
Connect one end of the supplied phone cord to the
phone port on the left (1-LINE) and the other to a
wall jack.
To connect an answering machine or use a different
phone cord, see the User Guide.
Make sure to remove the orange shipping lock from inside the device before you press the On button.