Reference Guide
hp officejet 6100 series
chapter 4
20
This selects Copy Setup, and then selects Set Copy Defaults.
Your settings are saved.
perform special copy jobs
In addition to supporting standard copying, your HP OfficeJet can also do the 
following:
• copy a photo
• fit a copy to the page
• print several copies on one page
• print two originals on one page
• shift image to increase the margin
• make a poster
• prepare a color T-shirt transfer
copy a photo
1 Load the photo on the glass.
2 If you are using photo paper, you must load it in the main paper tray. 
3 Press Paper Type, then press   until the desired photo paper option 
appears, then press Enter to select it.
The default paper type is Automatic, which means the HP OfficeJet will 
automatically detect and determine the paper type. You can choose the 
specific paper type by pressing   until the desired paper type appears.
For more information, see recommended paper-type settings for copying 
in the HP Photo & Imaging Help.
Tip: To enlarge a photo automatically to a full page, press Special 
Features until Fit to Page appears, then press Enter. For more 
information, see below.
4 Press Menu, press 1, then press 1 again.
This selects Copy Setup, and then Enhancements. Press Enter to select it.
5 Press   until Photo appears, then press Enter to select it.
6 Press Start Copy, Black or Start Copy, Color.
fit a copy to the page
Use Fit to Page when you want to automatically enlarge or reduce your original 
to fit the paper size you have loaded. You can enlarge a small photo to fit a full-
size page, as shown below. Using Fit to Page may also prevent unwanted 
cropping of text or images around the margins.
Tip: Make sure that the glass is clean and the original has been 
placed in the bottom-right corner of the glass. You cannot use the 
automatic document feeder (ADF) for this feature.










