Setup Guide

HP All-in-One • 7
16
b Follow the onscreen instructions. Complete the
Fax Setup Wizard and the Sign up now screens.
After you complete software installation, you are
fi nished.
b Double-click the HP All-in-One Installer
icon.
c Make sure you complete all screens,
including the Setup Assistant. After you
complete software installation, you are
fi nished.
Connect the USB cable
Macintosh Users:
Windows Users:
a Connect the USB cable to the port on the
back of the HP All-in-One, and then to any
USB port on your computer.
a Follow the onscreen instructions until you see the
prompt to connect the USB cable. (This may take
several minutes.)
Once the prompt appears, connect the USB cable
to the port on the back of the HP All-in-One, and
then to any USB port on your computer.
If you do not see this screen, see Troubleshooting
in the last section.