Setup Guide

4 • HP All-in-One
11
12
10
ab
a
b
Insert the black print cartridge
Insert the tri-color print cartridge
a Slide the tri-color print cartridge into the
left slot as shown.
b Push the top part of the cartridge fi rmly
up and into the slot until it snaps into
place.
a Slide the black print cartridge into the
right slot.
b Push the top part of the cartridge fi rmly
up and into the slot until it snaps into
place.
c Make sure both cartridges are secure.
Close the access door.
The device must be On before you can
insert the print cartridges.
Remove tape from both cartridges
Pull the pink tab to remove the tape from
both print cartridges.
Do not touch the copper-colored contacts
or retape the cartridges.