User's Manual

● Extremely smooth, shiny, or coated papers not specifically designed for the

HP All-in-One. They can jam the HP All-in-One or repel the ink.

● Multi-part forms, such as duplicate and triplicate forms. They can wrinkle or get

stuck, and the ink is more likely to smear.

● Envelopes with clasps or windows. They can get stuck in the rollers and cause

paper jams.

● Banner paper.

● 10 x 15 cm (4 x 6 inch) photo paper with or without tabs.

Additional papers to avoid when copying

● Envelopes.

● Transparency film other than HP Premium Inkjet Transparency Film or

HP Premium Plus Inkjet Transparency Film.

● Iron-On Transfers.

● Greeting card paper.

Load paper

This section describes the procedure for loading different types and sizes of paper

into the HP All-in-One for your copies, printouts, or faxes.

Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper

flat in a resealable bag. If the paper is not stored properly, extreme changes in

temperature and humidity might result in curled paper that does not work well

in the HP All-in-One.

● Load full-size paper

● Load 10 x 15 cm (4 x 6 inch) photo paper

● Load index cards

● Load envelopes

● Load other types of paper

Load full-size paper

You can load many types of letter, A4, or legal paper into the input tray of the HP All-

in-One.

To load full-size paper

1. Slide the paper-width guide to its outermost position.

User Guide

Load originals and load paper