User's Manual
HP SMH is the application used to query information about monitored devices and view indications
and instances on WBEM. This WBEM-based network management application enables you to
create subscriptions and view indications.
SysMgmtPlus functionality displays the property pages of various devices and firmware on HP
SMH. SysMgmtPlus allows HP SMH to display improved property pages that contain dynamic
content, providing the user to view and hide details of devices and firmware. The Health Tests are
associated with components. The healthtest feature provides an option to perform health test on
all the device instances of the component.
For complete information on installing, administrating, and troubleshooting SFM software and its
components, see the System Fault Management Administrator's Guide (http://
h20000.www2.hp.com/bc/docs/support/SupportManual/c02677231/c02677231.pdf?
HPBCMETA::).
Errors and error logs
Event log definitions
Often the underlying root cause of an MCA is captured by the server blade or firmware in both
the SEL and FPL logs. These root causes are easily matched with MCA events by timestamps. For
example, the loss of a processor VRM might cause a processor fault. Decoding the MCA error
logs would only identify the failed processor as the most likely faulty FRU. Following are some
important points to remember about events and event logs:
• Event logs are the equivalent of the old chassis logs for status or error information output.
• Symbolic names are used in the source code; for example, MC_CACHE_CHECK.
• The hex code for each event log is 128 bits long with an architected format:
Some enumerated fields can be mapped to defined text strings.◦
◦ All can be displayed in hex, keyword, or text mode.
• Events are created by firmware or the OS and are stored in either or all of the SEL iLO, and
forward progress event logs.
Events are sent by firmware or the OS over the PDH bus to iLO for storage in both of SEL and
FPL logs. Also, events such as "System Soft Reset," which indicates error reset during MCA,
is sent by iLO itself.
• The iLO 3 MP displays the SEL event logs.
Event log usage
To consult the event logs:
1. Connect to the system console.
2. Enter Ctrl–B to access the MP Main Menu.
3. To view event logs, enter the sl command:
[tfp10mp]</>hpliLO-> sl
Event Log Viewer Menu:
Log Name Entries % Full Latest %Full Latest Timestamped Entry
---------------------------------------------------------------------------
E - System Event 30 1 % 03 May 2012 01:20:43
F - Forward Progress 18354 100 % 03 May 2012 01:20:43
I - iLO Event 500 100 % 03 May 2012 01:20:43
C - Clear SEL and FPL
L - Live Events
Enter menu item or [Ctrl-B] to Quit:
System Event (E) and Forward Progress (F) logs are useful to determine the context of an error.
Errors and error logs 93