Hardware and Software Guide HP Notebook Series Document Part Number: 375424-001 March 2005 This guide explains how to identify, access, and use most of the hardware and software features available on your notebook.
© Copyright 2005 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Contents 1 Component ID Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 Power Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 2 Power Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Standby and Hibernation . . . . . . . . . . . . . . . . . . . . . . . . 2–3 Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3 Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4 Initiating Standby, Hibernation or Shutdown . . . . . . 2–5 Default Power Settings. . . . . . . . . . . . . . . . . . . . . . . . . . 2–7 Turning the Notebook On or Off . .
Contents Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5 Identifying Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . 3–5 Hotkey Quick Reference. . . . . . . . . . . . . . . . . . . . . . 3–6 Hotkey Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . 3–7 Using Hotkey Commands. . . . . . . . . . . . . . . . . . . . . 3–7 Quick Launch Buttons (Select Models Only) . . . . . . . 3–14 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 PC Cards and ExpressCards What Is a PC Card? . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . What Is an ExpressCard? . . . . . . . . . . . . . . . . . . . . . . . . Configuring an ExpressCard. . . . . . . . . . . . . . . . . . . Inserting an ExpressCard . . . . . . . . . . . . . . . . . . . . . Removing an ExpressCard . . . . . . . . . . .
Contents Preinstalled Communication Software. . . . . . . . . . . . . 10–7 Network Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–7 11 Wireless (Select Models Only) Wireless Local Area Network (Select Models Only) . 11–3 Setting Up a WLAN in Your Home . . . . . . . . . . . . 11–5 Using a WLAN Connection . . . . . . . . . . . . . . . . . . 11–6 Using Wireless Security Features . . . . . . . . . . . . . . 11–7 Installing Wireless Software (Optional) . . . . . . . . .
Contents 13 Setup Utility Opening the Setup Utility . . . . . . . . . . . . . . . . . . . . . . Changing the Language of the Setup Utility . . . . . . . . Navigating and Selecting in the Setup Utility . . . . . . . Displaying System Information . . . . . . . . . . . . . . . . . . Restoring Default Settings in the Setup Utility . . . . . . Using Advanced Setup Utility Features. . . . . . . . . . . . Closing the Setup Utility . . . . . . . . . . . . . . . . . . . . . . .
Contents 16 Travel and Shipping Preparation for Travel and Shipping . . . . . . . . . . . . . . 16–1 Tips for Traveling with Your Notebook . . . . . . . . . . . 16–1 17 Specifications Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . 17–1 Rated Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17–2 Expansion Port Input/Output Signals (Select Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Component ID chapter provides information on the functions and features ✎ This of components when used in Microsoft® Windows®. If using QuickPlay (select models only), the functionality of some components may differ. Refer to the HP QuickPlay User Guide for more information.
Component ID Top Components Keys Component Description 1 Function keys (12)* Perform system and application tasks. When combined with fn, function keys perform additional tasks as hotkeys. 2 Windows logo key Displays the Microsoft® Windows® Start menu. 3 fn key* Combines with other keys to perform system tasks as hotkeys. For example, pressing fn+f7 decreases screen brightness. 4 Embedded numeric Can be used like the keys on an external numeric keypad.
Component ID TouchPad Component Description 1 TouchPad* Moves the pointer. 2 Left TouchPad button* Functions like the left button on an external mouse. 3 Right TouchPad button* Functions like the right button on an external mouse. 4 TouchPad vertical scroll zone* Scrolls up or down. *This table describes default settings. For information about changing the functions of these TouchPad components, refer to “Setting TouchPad Preferences” in Chapter 3, “Keyboard and TouchPad.
Component ID Power Controls Depending on your notebook model, the location of the power/standby button may vary. Component Description 1 Power/standby When the notebook is ■ Off, press to start the notebook. ■ On, briefly press to initiate hibernation. ■ In standby, briefly press to resume from standby. ■ In hibernation, briefly press to restore from hibernation.
Component ID Buttons Depending on your notebook model, button locations may vary. Component Description 1 Quick Launch buttons (select models only) Launch default multimedia, digital imaging or music applications (varies by model). To reassign another application to a Quick Launch button, refer to “Quick Launch Buttons (Select Models Only)” in Chapter 3, “Keyboard and TouchPad.” 2 Volume down button Decreases system volume.
Component ID Component Description 3 Turns the wireless functionality on or off, but does not create a wireless connection. Wireless button (select models only) establish a wireless ✎ To connection, a wireless network must already be set up. For more information, refer to Chapter 11, “Wireless (Select Models Only).” 1–6 4 Volume mute button Mutes or restores volume. 5 Volume up button Increases system volume.
Component ID Lights Depending on your notebook model, light locations may vary. Component Description 1 Power/standby light On: Notebook is turned on. Blinking: Notebook is in standby. Off: Notebook is off or in hibernation. 2 Wireless light On: One or more internal wireless devices have been turned on. (select models only) establish a wireless connection, ✎ To a wireless network must already be set up. For more information, refer to Chapter 11, “Wireless (Select Models Only).
Component ID Wireless Antennae (Select Models Only) Component Description Antennae (2)* Send and receive wireless device signals. Å Exposure to Radio Frequency Radiation. The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
Component ID Front Components Speakers, Display Release Button and Consumer IR Lens Component Description 1 Consumer infrared (IR) lens (select models only) Links the notebook to an optional remote control. 2 Stereo speakers (2) Produce stereo sound. 3 Display release button Opens the notebook.
Component ID Lights Component Description 1 Power/standby light On: Notebook is turned on. Blinking: Notebook is in standby. Off: Notebook is off or in hibernation. 2 Battery light On: The battery pack is charging. Blinking: The battery pack has reached a low-battery condition. Off: The battery pack is fully charged or not inserted. 3 IDE (Integrated Drive Electronics) drive light On or blinking: The internal hard drive or an optical drive is being accessed.
Component ID Left-Side Components Ports and Jacks Depending on your notebook model, component locations may vary. Refer to the following illustrations. Component Description 1 Power connector Connects the AC adapter cable. 2 RJ-11 (modem) jack Connects the modem cable. 3 RJ-45 (network) jack Connects a network cable (not included).
Component ID Component Description 4 Connects the notebook to an optional docking device. Expansion port 2 (select models only) notebook has only one ✎ The expansion port. The term expansion port 2 describes the type of expansion port. expansion port signal ✎ For information, refer to “Expansion Port Input/Output Signals (Select Models Only)” in Chapter 17, “Specifications.” 5 USB ports Connect optional USB devices. of USB ports vary by ✎ Number model.
Component ID Media and Memory Card Slots Depending on your notebook model, component locations may vary. Refer to the following illustrations. Component Description 1 Digital Media Slot (select models only) Supports the following optional digital cards: SD (Secure Digital) Memory Card, SD I/O Card, Memory Stick, Memory Stick Pro, MultiMediaCard, xD-Picture Card, and SmartMedia. 2 PC Card slot In Windows, supports an optional Type I or Type II 32-bit (CardBus) or 16-bit PC Card.
Component ID Right-Side Components Depending on your notebook model, component locations may vary. Refer to the following illustrations. Component Description 1 Optical drive Supports an optical disc, such as a CD or DVD. 2 Audio-out (headphone) jack Connects an optional headphone or powered stereo speakers. Also connects the audio function of an audio/video device, such as a television or VCR. 3 Audio-in (microphone) jack Connects an optional stereo microphone.
Component ID Component Description 5 Monitor port Connects an optional VGA monitor or projector. 6 S-Video-out jack Connects the video function of an optional S-Video device, such as a television, VCR, or video capture card. 7 Security cable slot Attaches an optional security cable to the notebook. purpose of security solutions ✎ The is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen.
Component ID Bottom Components Mini PCI and Memory Module Compartment Component Description Mini PCI and memory module compartment ■ Holds an optional wireless LAN device (select models only). Ä To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your notebook by the governmental agency that regulates wireless devices in your country.
Component ID Bays, Battery Latch and Vents Component Description 1 Hard drive bay Holds the internal hard drive. 2 Vents (4) Provide airflow to cool internal components. Ä To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. 3 Battery bay Holds a battery pack. 4 Battery pack release Releases a battery pack from the battery bay.
Component ID Additional Hardware Components The following illustration and table identify and describe the additional equipment that is included with the notebook. Component Description 1 AC adapter Converts AC power to DC power. 2 Power cord* Connects an AC adapter to an AC outlet. 3 Battery pack Powers the notebook when the notebook is not connected to external power. 4 Modem cable* Connects a modem to an RJ-11 telephone jack or to a country-specific modem adapter.
Component ID Additional Components Optical Discs Software on optical discs, such as CDs or DVDs, is included with all notebook models. ■ The software packaged in the “Required for Setup” bag is not preinstalled on your notebook. Depending on how you want to use your notebook, you might want to install some or all of these applications. ■ The software packaged in the “Save for Later” bag is preinstalled or preloaded on your notebook.
Component ID 1–20 ■ Modem Approval label—Provides regulatory information about the modem and lists the agency approval markings required by some of the countries in which the modem has been approved for use. You might need this information when traveling internationally. The Modem Approval label is affixed to the inside of the Mini PCI and memory module compartment cover. ■ Wireless certification labels—Some notebook models include an optional WLAN device and/or an optional Bluetooth® device.
2 Power Å WARNING: To reduce the risk of electric shock or damage to your equipment: ■ Plug the power cord into an AC outlet that is easily accessible at all times. ■ Disconnect power from the notebook by unplugging the power cord from the AC outlet (not by unplugging the power cord from the notebook). ■ If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin; for example, by attaching a 2-pin adapter.
Power Power Sources The notebook can run on internal or external AC power. The following table indicates the best power sources for common tasks.
Power Standby and Hibernation Standby and hibernation are energy-saving features that conserve power and reduce startup time. They can be initiated by you or by the system. For details about when to use each setting, refer to “Initiating Standby, Hibernation or Shutdown,” later in this chapter. Standby Ä CAUTION: To avoid a complete battery discharge, do not leave your notebook in standby for extended periods. Connect the notebook to an external power source.
Power Hibernation Ä CAUTION: If the configuration of the notebook is changed during hibernation, resuming from hibernation may not be possible. When the notebook is in hibernation: ■ Do not connect or disconnect the notebook from a docking device. ■ Do not add or remove memory modules. ■ Do not insert or remove any hard drives. ■ Do not connect or disconnect external devices. ■ Do not insert or remove a PC Card, ExpressCard, or a digital card, such as a Secure Digital (SD) Card.
Power Initiating Standby, Hibernation or Shutdown The following sections explain when to initiate standby or hibernation and when to shut down your notebook. When You Leave Your Work ■ Initiating standby clears the screen and uses less power than leaving the notebook on. Your work returns instantly to the screen when you resume from standby. ■ Initiating hibernation clears the screen, saves your work to the hard drive, and uses much less power than standby.
Power When Using Infrared Communication or Drive Media Ä CAUTION: Do not initiate standby or hibernation while using drive media. Doing so may result in possible video and audio degradation and loss of audio or video playback functionality. Standby and hibernation interfere with the use of infrared and Bluetooth communication and drive media. Note the following guidelines: ■ If the notebook is in standby or hibernation, you cannot initiate an infrared or Bluetooth® transmission.
Power Default Power Settings The following tables describe the factory power settings on the notebook. You can change many of these settings according to your preference. For more information on changing power settings, refer to “Power Options,” later in this chapter. Turning the Notebook On or Off Task Procedure Results Turn on the notebook. Press the power/standby button. ■ The power/standby light is turned on. ■ The Windows operating system loads. Shut down the notebook.* 1.
Power Initiating or Resuming from Standby Task Procedure Result Initiate standby. With the notebook on, use one of the following procedures: ■ Press the fn+f5 hotkey. ■ Close the notebook display. ■ Select Start > Turn Off Computer > Stand By. ■ The power/standby light blinks. ■ The screen is cleared. Allow the system to initiate standby. No action is required. The system ■ The power/standby initiates standby light blinks.
Power Initiating or Restoring from Hibernation Task Procedure Result Initiate hibernation. With the notebook on, use one of the following procedures: ■ Briefly press the power/standby button. ■ Select Start > Shut Down > Hibernate. (If the Hibernate option is not displayed, press and hold shift.) ■ The power/standby light is turned off. ■ The screen is cleared. Allow the system to initiate hibernation. No action is required.
Power Emergency Shutdown Procedures Ä CAUTION: Emergency shutdown procedures result in the loss of unsaved data. If the notebook is unresponsive and you are unable to use normal shutdown procedures, try the following emergency procedures in the sequence provided: ■ Press ctrl+alt+delete. Select Shut Down > Turn Off. ■ Press and hold the power/standby button for at least 5 seconds. ■ Disconnect the notebook from external power and remove the battery pack.
Power Setting a Standby Password You can add a security feature that prompts you for your Microsoft® Windows® user password when the notebook resumes from standby. To set a password prompt: 1. Select Start > Control Panel > Performance and Maintenance > Power Options > Advanced tab. 2. Select the check box Prompt for password when the computer resumes from standby. 3. Select OK. For information about other passwords and security features, refer to Chapter 12, “Security.
Power To change the function of the power/standby button, the fn+f5 hotkey, or the display switch: 1. Select Start > Control Panel > Performance and Maintenance > Power Options > Advanced tab. ❏ To change the function of the display switch when you close the display, select a function from the drop-down list for When I close the lid of my portable computer. (The function of the display switch when you open the display is unaffected by these settings.
Power Processor Performance Controls (Select Models Only) On select notebook models, Windows XP supports software that enables you to control processor performance. The central processing unit (CPU) speed can be set for optimal performance or for optimal power conservation. For example, the software can be set to trigger an automatic change in processor speed when the power source changes from external power to battery pack power, or when the notebook use changes between active and idle.
Power Different states may be used, depending on whether the notebook is running on external or battery power. After a power scheme has been set, no other intervention is required to control the performance of your notebook processor. The following table describes the processor performance on external and battery power for the available power schemes. Processor Performance While on External Power Processor Performance While on Battery Power Home/Office Desk Always runs at the highest performance state.
Power Battery Pack Charging a Battery Pack To prolong battery life and optimize the accuracy of battery charge displays: ■ If you are charging a new battery pack: ❏ Charge the battery pack while the notebook is connected to external power through the AC adapter. ❏ When you charge the battery pack, charge it fully. ■ If you are charging an in-use battery pack: ❏ Allow the battery pack to discharge to about 10 percent of a full charge through normal use before charging it.
Power Monitoring the Charge in a Battery Pack Obtaining Accurate Charge Reports To increase the accuracy of battery charge reports: ■ Allow a battery pack to discharge to about 10 percent of a full charge through normal use before charging it. ■ When you charge a battery pack, charge it fully. The charge in even a new battery pack may be reported inaccurately until the battery pack has been fully charged at least once.
Power Power Meter displays battery status in both percentage and time: ■ The percentage indicates the amount of charge remaining in the battery pack. ■ The time indicates the approximate running time remaining on the battery pack if the battery pack continues to provide power at the current level. For example, the time remaining will decrease if you start playing a DVD and will increase if you stop playing a DVD.
Power Resolving Low-Battery Conditions Ä CAUTION: If the notebook has reached a critical low-battery condition and has begun to initiate hibernation, do not restore power until the power/standby light turns off. To resolve a low-battery condition: 2–18 ■ If external power is available, connect the notebook to the external power source. ■ If a charged battery pack is available, turn off the notebook or initiate hibernation, insert the charged battery pack, and then turn on the notebook.
Power Calibrating a Battery Pack When to Calibrate Even if a battery pack is heavily used, calibration should be necessary only once a month. You do not have to calibrate a new battery pack before first use. Calibration does not usually increase battery run time, but it can increase the accuracy of battery charge displays, especially under the following conditions: ■ When the battery pack has been unused for one month or more.
Power How to Calibrate To calibrate a battery pack, you must fully charge, fully discharge, and then fully recharge the battery pack. Charging the Battery Pack Charge the battery pack while the notebook is on. To charge the battery pack: 1. Insert the battery pack into the notebook. 2. Connect the notebook to external power through the AC adapter or an optional automobile or aircraft adapter. (The notebook battery light is on as the battery pack charges.) 3.
Power ■ The system will not decrease hard drive speed while the notebook is idle. ■ System-initiated standby will not occur. To fully discharge the battery pack: 1. Disable hibernation. To disable hibernation: a. Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. b. Clear the Enable hibernation check box. 2. Select Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab. 3.
Power Recharging the Battery Pack Ä CAUTION: After calibrating the battery pack, reenable hibernation. Failure to reenable hibernation may result in a complete battery drain and potential data loss. To reenable hibernation: 1. Select Start > Settings > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. 2. Select the Enable hibernation check box. 3. Select Apply. To recharge the battery pack: 1.
Power Conserving Power as You Work To conserve power as you work: ■ Prevent devices you are not using from drawing power from the notebook. For example: ❏ Turn off wireless connections and exit modem applications when you are not using them. ❏ Disconnect any external devices from the notebook that are not plugged into an external power source. ❏ Stop or remove an inserted PC Card or ExpressCard. ❏ Disable or remove an inserted digital card. ❏ Turn off a device connected to the S-Video-out jack.
Power Replacing a Battery Pack Ä CAUTION: To prevent loss of work when removing a battery pack that is the only power source, turn off the notebook or initiate hibernation. (If you initiate hibernation, do not begin the following procedure until the power/standby lights are turned off, indicating that hibernation is complete.) Removing a Battery Pack To remove a battery pack: 1. Turn the notebook upside down. 2. Slide the battery release latch 1 to release the battery pack. 3.
Power Inserting a Battery Pack To insert a battery pack: 1. Turn the notebook upside down. 2. Insert the battery pack 1 into the battery bay and rotate it 2 until it is seated.
Power Storing a Battery Pack Ä CAUTION: To prevent damage to a battery pack, do not expose it to high temperatures for extended periods of time. If a notebook will be unused and unplugged for more than 2 weeks, remove any battery packs and store them separately. High temperatures accelerate the self-discharge rate of a stored battery pack. To prolong the charge of a stored battery pack, store it in a cool, dry place. Use the following table to estimate how long you can safely store a battery pack.
Power Disposing of a Used Battery Pack Å WARNING: To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery pack; short the external contacts on a battery pack; or dispose of a battery pack in fire or water. Do not expose a battery pack to high temperatures above 60°C (140°F). Replace only with the battery pack approved for this notebook. N When a battery pack has reached the end of its useful life, do not dispose of the battery pack in general household waste.
3 Keyboard and TouchPad chapter provides information on the functions of the ✎ This keyboard and TouchPad when used in Windows. If using QuickPlay (select models only), functionality may differ. Refer to the HP QuickPlay User Guide for more information.
Keyboard and TouchPad TouchPad TouchPad Components Component Description 1 TouchPad* Moves the pointer. 2 Left TouchPad button* Functions like the left button on an external mouse. 3 Right TouchPad button Functions like the right button on an external mouse. 4 TouchPad vertical scroll zone* Scrolls up or down. *This table describes default settings. For information about changing the functions of these TouchPad components, refer to “Setting TouchPad Preferences,” later in this chapter.
Keyboard and TouchPad Using the TouchPad In Windows the TouchPad provides the navigation, selection, and scroll functions of an optional external mouse. ■ To move the pointer, slide your finger across the TouchPad surface in the direction you want to move the pointer. ■ To execute the click functions of the left or right button on an external mouse, press the left or right TouchPad button. ■ To scroll up or down, slide your finger up or down in the TouchPad scroll zone.
Keyboard and TouchPad Setting TouchPad Preferences Mouse Properties in Windows enables you to customize settings for pointing devices, including: ■ Enabling or disabling a pointing device (enabled by default). ■ TouchPad tapping, which enables you to tap the TouchPad once to select an object or twice to double-click an object (enabled by default). ■ Edge motion, which enables you to continue to scroll even though your finger has reached the edge of the TouchPad (disabled by default).
Keyboard and TouchPad Hotkeys Identifying Hotkeys Hotkeys are preset combinations of the fn key 2 with one of the following keys: esc key 1, function keys 3, backspace key 4, enter key 5, and end key 6. The icons on the f1 through f12 function keys represent their hotkey functions. The functions of all hotkeys are described in the following sections.
Keyboard and TouchPad Hotkey Quick Reference The following table identifies the default hotkey functions. The function of the fn+f5 hotkey can be changed. For ✎ instructions, refer to “Setting Other Power Preferences” in Chapter 2, “Power.” Default Function Hotkey Opens Help and Support Center. fn+f1 Opens print options window. fn+f2 Opens default Internet browser. fn+f3 Switches the image among displays. fn+f4 Initiates standby. fn+f5 Initiates QuickLock. fn+f6 Decreases screen brightness.
Keyboard and TouchPad Hotkey Procedures Using Hotkeys on the Internal Keyboard To use a hotkey command on the notebook keyboard, use either of the following procedures: ■ Briefly press fn, and then briefly press the second key of the hotkey command. ■ Press and hold down fn, briefly press the second key of the hotkey command, and then release both keys at the same time.
Keyboard and TouchPad ■ Checkups for notebook functionality. ■ Automated and interactive troubleshooting, repair solutions, and system recovery procedures. ■ Links to HP support specialists. In Windows, you can also access the Help and Support Center by selecting Start > Help and Support. Open Print Window (fn+f2) The fn+f2 hotkey opens the print options window of the active Windows application. Open Web Browser (fn+f3) The fn+f3 hotkey opens your Web browser.
Keyboard and TouchPad Most external monitors receive video information from the notebook using the external VGA video standard. The fn+f4 hotkey can also toggle images among other devices receiving video information from the notebook.
Keyboard and TouchPad The function of the fn+f5 hotkey can be changed. For example, you can set the fn+f5 hotkey to initiate hibernation instead of standby. In all Windows operating system windows, references to the sleep button apply to the fn+f5 hotkey. For information about changing the function of the fn+f5 hotkey, refer to “Setting Other Power Preferences” in Chapter 2, “Power.” For more information about using standby and hibernation, refer to Chapter 2, “Power.
Keyboard and TouchPad Decrease Brightness (fn+f7) The fn+f7 hotkey decreases the brightness of the notebook screen. The longer you hold down the fn+f7 hotkey, the more the screen dims. Decreasing screen brightness conserves power. To increase screen brightness, press the fn+f8 hotkey. Increase Brightness (fn+f8) The fn+f8 hotkey increases the brightness of the notebook screen. The longer you hold down the fn+f8 hotkey, the more the screen brightens. To decrease screen brightness, press the fn+f7 hotkey.
Keyboard and TouchPad Play, Pause or Resume an Audio CD or a DVD (fn+f9) ■ If the audio CD or the DVD is not playing, press the fn+f9 hotkey to begin or resume the play. ■ If the audio CD or the DVD is playing, press the fn+f9 hotkey to pause the play. Stop an Audio CD or a DVD (fn+f10) The fn+f10 hotkey stops the play of an audio CD or a DVD. You must stop a CD or DVD that is playing before you can remove it from the optical drive.
Keyboard and TouchPad Navigate Back (fn+backspace) In Windows, the fn+backspace hotkey navigates backward in the current application. It has the same function as the alt+left arrow Windows hotkey. Select an Item on the Screen (fn+enter) The fn+enter hotkey selects items on the screen. Press the fn+enter hotkey once to make a selection. Display System Information (fn+esc) The fn+esc hotkey displays information about system hardware components and software version numbers.
Keyboard and TouchPad Quick Launch Buttons (Select Models Only) Quick Launch buttons enable you to use one keystroke to access a software application. A Quick Launch button can be reassigned to an Internet or network destination or to any software application or data file. For example, a Quick Launch button can be assigned to open ■ Your Internet browser to a favorite Web page. ■ An application, such as Microsoft Word. ■ A document, such as an Excel worksheet.
Keyboard and TouchPad Keypads Using an Embedded Numeric Keypad The 15 keys of the embedded numeric keypad 1 can be used like the keys on an external numeric keypad. When the embedded numeric keypad is turned on, each key on the keypad performs the function indicated by the icon in the upper-right corner of the key. embedded numeric keypad cannot be used while an ✎ The external numeric keypad is connected to the notebook. To turn the keypad on: » Press fn+num lk 2. The num lock light 3 is turned on.
Keyboard and TouchPad Switching the Functions of Keypad Keys You can temporarily switch the functions of an embedded numeric keypad key between its standard function and its keypad function. ■ To use a key on the keypad as a keypad key while the keypad is turned off, press and hold fn while pressing the key. ■ To use a key on the keypad as a standard key while the keypad is turned on: ❏ Press and hold fn to type with the key in lowercase. ❏ Press and hold fn+shift to type with the key in uppercase.
Keyboard and TouchPad Turning Num Lock Mode On and Off As You Work To turn num lock mode on or off on an external numeric keypad as you work, press the num lk key on the external numeric keypad, not on the notebook. ■ When an external numeric keypad is turned on and is in num lock mode, the num lock light on the notebook is on. ■ When an external numeric keypad is turned off or is turned on with num lock mode turned off, the num lock light on the notebook is off.
4 Multimedia chapter provides information on the multimedia functions ✎ This of the notebook when used in Windows. If using QuickPlay (select models only), functionality may differ. Refer to the HP QuickPlay User Guide for more information. Audio Features Adjusting the Volume To adjust volume, use the volume buttons on the notebook. Component Description Volume down button Press to decrease volume. Volume up button Press to increase volume. Volume mute button Press to mute volume.
Multimedia You can also adjust volume by using the volume control software available in the Windows operating system and in some Windows multimedia applications. volume mute button on the notebook overrides all software ✎ The volume settings. To access the Windows volume controls: » Select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices > Volume tab. Using the Audio-In (Microphone) Jack The audio-in (microphone) jack connects an optional stereo microphone.
Multimedia Connecting the Audio-Out (Headphone) Jack An audio-out jack, sometimes called a headphone jack, connects optional headphones or externally powered stereo speakers. An audio-out jack is also used to connect the audio functions of an audio/video device such as a television or VCR. The notebook is set by default to transmit analog audio signals through the audio-out (headphone) jack. The notebook can also transmit S/PDIF digital audio signals through the audio-out jacks.
Multimedia Video Features Connecting an S-Video Device Connecting the Audio The S-Video-out jack supports video signals only. If you are setting up a configuration that combines audio and video functions, such as playing a DVD movie on your notebook and displaying it on your television, you need a standard 3.5-mm audio cable, available from most computer or electronics retailers. Plug one end of the audio cable into an audio-out (headphone) jack on the notebook.
Multimedia Connecting the Video To transmit video signals through the S-Video-out jack, you need a standard S-Video cable, available from most computer or electronics retailers. To connect the S-Video cable: 1. Plug either end of the S-Video cable into the notebook S-Video-out jack, illustrated below. 2. Plug the other end of the cable into the S-Video-in jack on the external device. on your notebook model, the location of the ✎ Depending S-Video-out jack will vary.
Multimedia Displaying a Video Image To display a video image, both the notebook and the video device must be turned on. Switch the image between the notebook display and the video device display by repeatedly pressing the fn+f4 hotkey. Pressing the fn+f4 hotkey switches the image among the notebook display, any connected displays, and simultaneous display. The notebook can transmit composite video signals to an external device only when an optional docking device is connected to the notebook.
Multimedia ■ InterVideo WinDVD Creator Plus—Provides the ability to create, edit, and burn movies to a DVD or video CD. This software is located on the InterVideo WinDVD Creator CD, included with select notebooks. ■ Sonic RecordNow!—Enables you to create copies of data and audio CDs and DVDs, and create personalized audio CDs and DVDs. RecordNow! is preinstalled on select notebooks. more information about using multimedia software, refer ✎ For to the online Help for the software.
Multimedia Installing Software To install software included with the notebook from a CD: 1. Connect the notebook to a reliable electrical outlet. 2. Close any open applications. 3. Insert a software CD into the optical drive. ❏ If Autorun is enabled an installation wizard is displayed. ❏ If Autorun is disabled, select Start > Run. Enter x:\setup.exe where x is your CD drive designation and then select OK. 4. When the installation wizard is displayed, follow the installation instructions on the screen. 5.
Multimedia Changing DVD Region Settings Ä CAUTION: The region settings on your DVD drive can only be changed 5 times. ■ The region setting you select the fifth time becomes the permanent region setting on the DVD drive. ■ The number of allowable region changes remaining on the drive is displayed in the Remaining Times Until Permanent field in the WinDVD window. The number in the field includes the fifth and permanent change. Most DVDs that contain copyrighted files also contain region codes.
Multimedia Using WinDVD To change the region settings on a drive using WinDVD: 1. Open WinDVD through one of the following methods: ❏ Select the WinDVD Player icon in the notification area, at the far right of the taskbar. ❏ Select Start > (All) Programs > InterVideo WinDVD > InterVideo WinDVD. 2. Right-click the WinDVD player window. 3. Select Setup. 4. Select the button for the region. 5. Select OK.
5 Drives Ä CAUTION: To reduce the risk of critical data loss, initiate standby before you move the notebook or an optional external hard drive from one location to another. To initiate standby, select Start > Turn Off Computer > Standby. For more information on initiating and resuming from standby, refer to Chapter 2, “Power.” Removable drives enable you to store and access data. A USB drive can be added by connecting the drive to a USB port on the notebook or on an optional docking device.
Drives Drive Care Drives are fragile notebook components that must be handled with care. The following cautions apply to all drives. Additional cautions are included with the procedures to which they apply. Ä■ CAUTION: To prevent loss or damage to the notebook or a drive: ■ ■ ■ ■ ■ ■ Handle a drive carefully. Do not drop it. Excessive force can damage drive connectors. When you insert a drive, use only enough force to seat the drive.
Drives Removing the Primary Hard Drive Ä■ CAUTION: To prevent system lockup and loss of information: Shut down the notebook before removing the hard drive from the hard drive bay. Do not remove the hard drive while the notebook is on, in standby or in hibernation. ■ If you are not sure whether the notebook is in hibernation, turn the notebook on by pressing the power/standby button. Then shut down the notebook through the operating system.
Drives 5. Lift the hard drive bay cover 1 and remove it from the notebook 2. 6. Slide the hard drive toward the edge of the notebook to release it 1. 7. Remove the hard drive 2.
Drives Reinstalling the Primary Hard Drive To reinstall the primary hard drive: 1. Lower the hard drive into the hard drive bay 1. 2. Slide the hard drive away from the edge of the notebook until it is fully seated 2.
Drives 3. Align the tabs on the hard drive cover with the slots on the notebook 1 and press the hard drive cover down until it snaps into place 2. 4. Tighten the screws on the hard drive bay cover.
Drives Removing an Optical Disc (Without Power) To remove an optical disc when power is unavailable: 1. Insert the end of a paper clip into the release access in the front bezel of the drive 1. 2. Press gently on the paper clip until the media tray is released, and then pull out the tray until it is fully extended 2. 3. Remove the disc from the tray by gently pressing down on the spindle while lifting the outer edges of the disc 3. Handle the disc by the edges, not the flat surfaces.
Drives Displaying Optical Disc Contents When an optical disc is inserted into a drive and Autorun is enabled, the contents of the disc display on the screen. To display the contents of a disc when Autorun is not enabled: 1. Click Start > Run, and then type x: where x = the designation of the drive containing the disc. 2. Press enter.
6 PC Cards and ExpressCards What Is a PC Card? Ä CAUTION: If you install software or enablers provided by a PC Card manufacturer, you may not be able to use other PC Cards. If you are instructed by the documentation included with your PC Card to install device drivers: ■ ■ Install only the device drivers for your operating system. Do not install other software, such as card services, socket services, or enablers, that may also be supplied by the PC Card manufacturer.
PC Cards and ExpressCards Inserting a PC Card CAUTION: To prevent damage to the connectors: ■ ■ Use minimal pressure when inserting a PC Card into a PC Card slot. Do not move or transport the notebook while a PC Card is inserted. 1. Press the PC Card eject button 1, and then remove the PC Card cover 2.
PC Cards and ExpressCards 2. Hold the PC Card label-side up with the connector facing the notebook. 3. Gently slide the card into the slot until the card is seated. The operating system will issue a sound to indicate that a device has been detected.
PC Cards and ExpressCards Removing a PC Card Ä CAUTION: To prevent loss of work or an unresponsive system, stop the PC Card before removing it. 1. Stop the PC Card by selecting the Safely Remove Hardware icon in the notification area at the far right of the taskbar, and then selecting the PC Card. (To display the Safely Remove Hardware icon, select Show Hidden Icons on the taskbar.) 2. Press the PC Card eject button 1. (This action extends the button into position for releasing the PC Card.) 3.
PC Cards and ExpressCards What Is an ExpressCard? The ExpressCard is a next-generation PC Card with higher performance and scalability and is designed to conform to the standard specifications of the PCMCIA. To support a broad range of applications, ExpressCards come in 2 sizes: ExpressCard/34 and ExpressCard/54. The ExpressCard slot on your notebook supports one ExpressCard, which may be either size.
PC Cards and ExpressCards Configuring an ExpressCard CAUTION: If you install all of the software or any of the enablers provided by an ExpressCard manufacturer, you may not be able to use other ExpressCards. If you are instructed by the documentation included with your ExpressCard to install device drivers: ■ Install only the device drivers for your operating system.
PC Cards and ExpressCards 3. Hold the ExpressCard label-side up with the connectors facing the notebook. 4. Gently slide the card into the slot until the card is seated.
PC Cards and ExpressCards Removing an ExpressCard Ä CAUTION: To prevent loss of work or an unresponsive system, stop the ExpressCard before removing it. an ExpressCard, even if it is not in use, conserves ✎ Stopping power. 1. Close all applications and complete all activities that are supported by the ExpressCard. 2. To stop an ExpressCard, select the Safely Remove Hardware icon on the taskbar, and then select the ExpressCard.
7 Digital Memory Cards (Select Models Only) Using Digital Media The Digital Media Slot supports the following digital media formats: ■ Secure Digital (SD) Memory Card (SD Card) ■ Secure Digital Input/Output (SD I/O) ■ MultiMediaCard (MMC) ■ Memory Stick (MS) ■ Memory Stick Pro (MSP) ■ SmartMedia (SM) ■ xD-Picture Card (XD) Digital memory cards provide secure data storage and convenient data sharing.
Digital Memory Cards (Select Models Only) Inserting Digital Cards Ä■ CAUTION: To prevent damage to the digital card connectors: Use minimal force when inserting a digital card into a Digital Media Slot. ■ Do not move or transport the notebook while digital cards are inserted. 1. Hold the card label-side up with the connectors facing the notebook. 2. Gently slide the card into the Digital Media Slot until the card is seated. (The card will extend slightly beyond the edge of the notebook.
Digital Memory Cards (Select Models Only) Removing Digital Cards To remove a digital card: 1. Complete all activities that are supported by the card (such as a data transfer) and close all applications. 2. To stop a digital card, select the Safely Remove Hardware icon on the taskbar, and then select the digital card. (To display the Safely Remove Hardware icon on the taskbar, click the arrow icon for Show Hidden Icons.) 3. Slide the card out of the slot.
Digital Memory Cards (Select Models Only) Disabling or Restarting Digital Cards An inserted digital card uses power even when the card is not in use. Disabling the card conserves power. To disable an inserted digital card: » Select the My Computer icon on the Windows desktop, right-click the drive assigned to the card, and then select Eject. (The card is stopped but is not released from the Digital Media Slot.) To restart the card, remove and then reinsert it.
8 Memory Modules What Is a Memory Module? Å WARNING: Failure to unplug the power cord and remove all battery packs before installing a memory module can damage the equipment and expose you to the risk of electrical shock. Ä CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are discharged of static electricity by touching a grounded metal object. For more information, refer to the Regulatory and Safety Notices guide.
Memory Modules Replacing a Memory Module To replace a memory module: 1. Shut down the notebook. (If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power/standby button. Then shut down the notebook through the operating system.) 2. Disconnect all external devices connected to the notebook. 3. Disconnect the power cord. 4. Remove any battery packs from the notebook. 5. Loosen the memory module cover screws 1. 6.
Memory Modules 7. If there is a memory module in the memory module slot, remove it: a. Pull away the retention clips on each side of the module 1. (The module tilts upward.) b. Grasp the edges of the module and gently pull the module out of the memory module slot 2. To protect a memory module after removal, place it in an electrostatic-safe container.
Memory Modules 8. Insert the new memory module: a. Align the keyed (notched) edge of the module with the tabbed area in the memory module slot. b. With the module at a 45-degree angle from the surface of the memory module compartment, press the module into the memory module slot until it is seated 1. c. Press the module downward until the retention clips snap into place 2.
Memory Modules 9. Replace the memory module cover 1 and tighten the memory module cover screws 2.
Memory Modules Hibernation File When random access memory (RAM) increases, the operating system increases the hard drive space reserved for the hibernation file. If you experience problems with hibernation after increasing memory, verify that your hard drive has enough free space to accommodate a larger hibernation file. ■ To display the amount of RAM in the system: ❏ Select Start > Control Panel > Performance and Maintenance > System > General tab. – or – ❏ Press fn+esc.
9 USB Devices What Is USB? Universal Serial Bus (USB) is a hardware interface that can be used to connect external devices, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the notebook. Depending on model, the notebook has 2 or 4 standard USB connectors that support USB 1.1 and USB 2.0 devices.
USB Devices Using USB Devices To use a USB device: » Plug the device into one of the USB ports on your notebook. USB hubs can be connected to a USB port on the notebook or on an optional docking device. Hubs can support several USB devices. ■ Powered hubs must be connected to external power. ■ Unpowered hubs must be connected either to a USB port on the notebook or to a port on a powered hub.
10 Modem and Networking Internal Modem Å WARNING: Connecting the notebook to a digital PBX system line can permanently damage the modem. Jacks for digital PBX systems may resemble analog telephone jacks, but are not compatible with the modem. Immediately disconnect your modem cable if you accidentally connect it to a digital PBX system line. A modem cable, which has a 6-pin RJ-11 connector at each end, must be connected to an analog telephone line.
Modem and Networking Connecting a Modem Cable To connect a modem cable: Å WARNING: To avoid the risk of electrical shock, fire, or damage to the equipment, do not plug a modem cable into the network jack. 1. If the modem cable contains noise suppression circuitry 1, which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the notebook. 2. Plug the modem cable into the modem jack 2 on the notebook. 3.
Modem and Networking Using a Country-Specific Modem Cable Adapter Telephone jacks vary by country and region. To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack: Å WARNING: To avoid the risk of electrical shock, fire, or damage to the equipment, do not plug a modem cable into the network jack. 1.
Modem and Networking Modem Region Selection Viewing the Current Regional Selection To see the current regional setting for your modem: 1. Select Start > Control Panel > Date, Time, Language, and Regional Options > Regional & Language Options. 2. Under Location, view your present location. Adding New Locations When Traveling Ä CAUTION: Do not delete your current modem region settings.
Modem and Networking To add a new country location: 1. Select Start > Control Panel > Network and Internet Connections > Phone and Modem Options > Dialing Rules tab. 2. Select the New button and assign a name (home, work, etc.) to the location. 3. Select the country/region from the drop-down list. drop-down list may include countries not supported ✎ The by the modem. Unless you select a supported country, the country selection will default to USA or UK. 4. Select OK > OK.
Modem and Networking ■ Check the telephone number you are dialing and the response of the remote modem. Dial the telephone number on the telephone, wait for the remote modem to answer, and then hang up. ■ Set the modem to ignore dial tones. If the modem receives a dial tone it does not recognize, it will not dial and will display a No Dial Tone error message. Use the following procedures to set the modem to ignore all dial tones before dialing: 1.
Modem and Networking Preinstalled Communication Software To use preinstalled modem software for terminal emulation and data transfer: 1. Select Start > All Programs > Accessories > Communications. 2. Select the appropriate fax or terminal emulation program or Internet connection wizard. Network Cable A network cable (not included) has an 8-pin RJ-45 connector at each end.
Modem and Networking To connect a network cable: 1. If the network cable contains noise suppression circuitry 1, which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the notebook. 2. Plug the network cable into the network jack 2 on the notebook. 3. Plug the other end of the cable into an RJ-45 wall jack 3.
11 Wireless (Select Models Only) If your notebook is equipped with an integrated wireless device such as 802.11 or Bluetooth wireless devices, you have a wireless notebook. ■ An 802.11 wireless notebook can connect to wireless networks in corporate offices, your home, and public places. Wireless networks include wireless local area networks (WLANs) or “hotspots.” Hotspots are wireless access points available in public places, such as airports, restaurants, coffee shops, hotels, and universities.
Wireless (Select Models Only) Your notebook has a button that may be used to enable and disable the 802.11 and Bluetooth wireless devices and an associated light to indicate the state of the wireless devices. The following illustration shows the wireless button 1 and light 2. In addition to the wireless button and light, your notebook may have a software utility, Wireless Assistant (select models only), that enables you to control your wireless devices.
Wireless (Select Models Only) Wireless Local Area Network (Select Models Only) With the 802.11 wireless device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories linked by a wireless router or a wireless access point. ■ A large scale WLAN, such as a corporate WLAN or public WLAN hotspot, typically uses wireless access points, that can handle a large number of computers and accessories and can separate critical network functions.
Wireless (Select Models Only) There are 3 popular implementations of WLAN adapters: ■ 802.11b only ■ 802.11b/g ■ 802.11a/b/g 802.11b, the first popular WLAN standard, supports data rates of up to 11 Mbps and operates at a frequency of 2.4 GHz. 802.11g, which came later, also operates at 2.4 GHz but supports data rates of up to 54 Mbps. An 802.11g WLAN device is backward compatible with 802.11b devices, so they can operate on the same network. 802.
Wireless (Select Models Only) Setting Up a WLAN in Your Home To set up a WLAN and connect to the Internet in your home, you need the following equipment. The illustration below shows an example of a completed wireless network installation that is connected to the Internet. This wireless network includes ■ An optional broadband modem (either DSL or cable) and high-speed Internet service purchased from an Internet service provider (ISP) 1. ■ An optional wireless router (purchased separately) 2.
Wireless (Select Models Only) Using a WLAN Connection To use a WLAN connection: ■ Verify that all drivers required by the 802.11 wireless device are installed and that the 802.11 wireless device is correctly configured. you are using an integrated 802.11 wireless device, all ✎ Ifrequired drivers are installed and the adapter is preconfigured and ready for use. ■ If you are using an integrated 802.11 wireless device, verify that the 802.11 wireless device is turned on. When the 802.
Wireless (Select Models Only) Using Wireless Security Features When you set up your own WLAN or access an existing WLAN, always ensure that security features are protecting the WLAN. If you do not enable security on your WLAN, an unauthorized wireless user can access your notebook data and use your Internet connection without your knowledge. The most common security levels are Wi-Fi Protected Access (WPA)-Personal and Wired Equivalent Privacy (WEP).
Wireless (Select Models Only) Identifying a WLAN Device To install WLAN software for an integrated 802.11 wireless device, you need to know the name of the integrated 802.11 wireless device on your notebook. To identify an integrated 802.11 wireless device: 1. Display the names of all the 802.11 wireless devices on your notebook: a. Select Start > My Computer. b. Right-click in the My Computer window. c. Select Properties > Hardware tab > Device Manager > Network Adapters. 2. Identify the 802.
Wireless (Select Models Only) The WLAN software is also available as a SoftPaq at the HP Web site. To access, download, and install the SoftPaq, use either of the following procedures: ■ Select Start > Help and Support. – or – ■ Visit the HP Web site at http://www.hp.com/support: a. Choose your language and region. b. Select the Download Drivers and Software radio button c. Enter your computer model information, and then follow the instructions provided at the Web site.
Wireless (Select Models Only) Bluetooth (Select Models Only) The Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as ■ Network access points. ■ Computers (desktop, notebook, PDA). ■ Phones (cellular, cordless, smart phone). ■ Imaging devices (printer, camera). ■ Audio devices (headset, speakers).
Wireless (Select Models Only) ■ Bluetooth serial port—Transfers data over the Bluetooth link using a virtual COM port. ■ Hands-Free—Enables a vehicle-embedded, hands-free unit or a notebook serving as a hands-free unit to establish a wireless connection to a cellular phone and to act as the Bluetooth cellular phone audio input and output mechanism. ■ Basic imaging—Provides a wireless connection between a Bluetooth-enabled camera and other Bluetooth devices.
Wireless (Select Models Only) Device Power States The wireless button 1 enables and disables 802.11 wireless and Bluetooth devices in conjunction with Wireless Assistant (select models only). By default, the 802.11 wireless and Bluetooth devices and wireless light 2 are turned on when you turn on the notebook. on a wireless device does not automatically create a ✎ Turning WLAN or connect you to a WLAN.
Wireless (Select Models Only) The 802.11 wireless and Bluetooth devices have 2 power states: ■ Enabled ■ Disabled You can enable and disable the wireless devices with the wireless button. When the wireless devices are enabled with the wireless button, you can use Wireless Assistant (select models only) to turn on and off the devices individually. When the wireless devices are disabled, you must enable them before you can turn them on or off with Wireless Assistant.
Wireless (Select Models Only) Turning On the Devices If And ■ Wireless Assistant You want to turn on (select models either or both only) shows that devices both WLAN and Bluetooth are off ■ Wireless light is off Then 1. Right-click the Wireless Assistant icon in the notification area. 2. Select the device or devices you want to turn on. wireless devices ✎ Ifaretheturned off, pressing the wireless button disables both devices. The button does not turn on the devices.
Wireless (Select Models Only) Turning Off and Disabling the Devices If And Then ■ Wireless Assistant (select models only) shows that both WLAN and Bluetooth are on ■ Wireless light is on You want to disable both devices Press the wireless button. You want to turn off either or both devices 1. Right-click the Wireless Assistant icon in the notification area. 2. Select the device or devices you want to turn off.
12 Security Security Features solutions are designed to act as deterrents. These ✎ Security deterrents may not prevent a product from being mishandled or stolen. The security features provided with the notebook can protect the notebook, personal information, and data from a variety of risks. Depending on your environment, some security features may be unnecessary.
Security To Protect Against Use This Security Feature Unauthorized use of the notebook ■ Quick Lock ■ Power-on password* Unauthorized access to the Setup utility (f10) HP administrator password* Unauthorized startup from a CD or a diskette Device Security* Unauthorized access to data ■ HP administrator password* ■ Firewall software ■ Windows updates Unauthorized access to the BIOS settings and other system identification information HP administrator password* Unauthorized removal of the noteboo
Security QuickLock The fn+f6 hotkey initiates the operating system QuickLock security feature. QuickLock protects your notebook by displaying the operating system log-on screen. While the log-on screen is displayed, the notebook cannot be accessed until a Windows user password or Windows administrator password is entered. Before you can use the QuickLock feature, you must set a Windows user password or Windows administrator password.
Security HP and Windows Passwords HP security features and Windows operating system security features work independently from one another. For example, a device disabled in the Setup utility cannot be enabled in Windows. Some password options are provided by your HP software, and others are provided by your operating system. HP passwords and Windows passwords are also independent of one another. The following table lists the different passwords used by HP and Windows and describes their functions.
Security HP and Windows Password Guidelines HP and Windows passwords are not interchangeable. You must use an HP password at an HP password prompt and a Windows password at a Windows password prompt. For example: ■ If a power-on password is set, the power-on password (not a Windows password) must be entered when the notebook starts up or restores from hibernation.
Security Although you can use the same text for various passwords, HP passwords and Windows passwords function independently. Even if you plan to use the same text for an HP password and a Windows password, you must set the HP password in the Setup utility and the Windows password in your operating system. their names are similar, an HP administrator ✎ Although password and a Windows administrator password have different functions.
Security Setting HP Administrator Passwords An HP administrator password is set, changed, or deleted in the Setup utility. To manage the password: 1. Shut down the notebook. If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power button, and then shut down the notebook through the operating system. 2. Be sure that the hard drive is inserted into the notebook (not into an optional docking device or external MultiBay). 3.
Security Entering HP Administrator Passwords At the Enter SETUP Password prompt, type your HP administrator password with the same keys you used to set the password, and then press enter. After 3 unsuccessful attempts to enter the HP administrator password, you must restart the notebook and try again. Power-On Passwords A power-on password prevents unauthorized use of the notebook. After this password is set, it must be entered each time the notebook is turned on or restarted.
Security 3. Open the Setup utility by turning on or restarting the notebook. Press f10 while Setup message is displayed in the lower-left corner of the screen. 4. Use the arrow keys to select Security > Power-On password, and then press enter. ❏ To set a power-on password, type the password in the Enter New Password and Confirm New Password fields, and then press enter.
Security Device Security From the Setup utility Device Security menu, you can disable the ability of the notebook to start from a CD or a diskette drive. To disable or reenable notebook capabilities in the Setup utility: 1. Shut down the notebook. If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power button, and then shut down the notebook through the operating system. 2.
Security Antivirus Software When you use the notebook for e-mail, network, or Internet access, you expose the notebook to computer viruses. Computer viruses can disable your operating system, applications, or utilities or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair damage they have caused. To provide protection against newly discovered viruses, antivirus software must be updated. Norton AntiVirus is preinstalled on the notebook.
Security Critical Security Updates for Windows XP Ä CAUTION: Because new computer viruses are being detected all the time, it is recommended that you install all critical updates as soon as you receive an alert from Microsoft. You should also run Windows Update on a monthly basis to install the latest recommended updates from Microsoft. A Critical Security Updates for Windows XP disc may have been included with your notebook to provide additional updates delivered after the computer was configured.
Security Firewall Software When you use the notebook for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you, your notebook, and your data. Firewalls monitor all incoming and outgoing traffic on your computer by including features such as logging and reporting, automatic alarms, and user interfaces for configuring the firewall. To protect your privacy, it is recommended that you use firewall software.
Security Optional Security Cable solutions are designed to act as deterrents. These ✎ Security deterrents may not prevent a product from being mishandled or stolen. To install a security cable: 1. Loop the security cable around a secured object. 2. Insert the cable lock into the security cable slot.
Security 3. Turn the key counterclockwise 1, remove the key 2, and keep it in a safe location.
13 Setup Utility The Setup utility is a ROM-based information and customization utility that can be used even when your Windows operating system is not working or will not load. The utility reports information about the notebook and provides settings for startup, security, and other preferences. Step-by-step instructions for setting specific preferences are included by topic earlier in this guide. For example, procedures for setting security preferences are provided in Chapter 12, “Security.
Setup Utility Opening the Setup Utility To open the Setup utility: 1. Turn on or restart the notebook in Windows. 2. Before Windows opens and while the “Press to enter setup” prompt is displayed in the lower-left corner of the screen, press f10. Changing the Language of the Setup Utility The following procedure explains how to change the language of the Setup utility. 1.
Setup Utility Navigating and Selecting in the Setup Utility Because the Setup utility is not Windows-based, it does not support the TouchPad. Navigation and selection are by keystroke. ■ To choose a menu or a menu item, use the arrow keys. ■ To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or f5 or f6. ■ To select an item, press enter. ■ To close a text box or return to the menu display, press esc.
Setup Utility Restoring Default Settings in the Setup Utility The following procedure explains how to restore the Setup utility default settings. 1. To open the Setup utility, turn on or restart the notebook in Windows, and then press f10 while the prompt, “Press to enter setup,” is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Exit > Load Setup Defaults. 3. When the Setup Confirmation is displayed, press enter to save your preferences. 4.
Setup Utility The “ to boot from LAN” message that is displayed in the lower-left corner of the screen each time the notebook is started or restarted in Windows or restored from hibernation is the prompt for a Network Service Boot. The “Press to change boot order” message that is displayed in the lower-left corner of the screen each time the notebook is started or restarted in Windows or restored from hibernation is the prompt to change the boot order.
14 Software Updates and Recoveries Software Updates For optimal notebook performance and to make sure your notebook remains compatible with changing technologies, install the latest versions of the software provided with your notebook as they become available. You may find that the easiest way to update the software provided with your notebook is to use the software update links provided at Start > Help and Support.
Software Updates and Recoveries Preparing for a Software Update If your notebook connects to a network, consult with your network administrator before installing any software updates, particularly a ROM update. It is also recommended that you set a restore point before beginning a software update. For instructions, refer to “System Restore Points,” later in this chapter. To prepare for any software update, you need to identify your notebook type, series or family, and model.
Software Updates and Recoveries Accessing Notebook ROM Information To determine whether an available ROM update is a later ROM version than the ROM version currently installed on the notebook, you need to know the version of the currently installed ROM. To view the ROM version of your notebook: » Press fn+esc. viewing system information, the system BIOS date is the ✎ When version number of the system ROM. The BIOS date may display in a decimal format, such as 10/19/2003 F.07.
Software Updates and Recoveries Downloading and Installing an Update Most software at the HP Web site is packaged in compressed files called SoftPaqs. Some ROM updates may be packaged in compressed files called ROMPaqs. Most download packages contain a file named Readme.txt. A Readme.txt file contains detailed descriptive, installation, and troubleshooting information about the download. The Readme.txt files included with ROMPaqs are in English only.
Software Updates and Recoveries Downloading a ROM Update: 1. Access the page at the HP Web site that provides software for your notebook: ❏ Select Start > Help and Support, and then select a software update link. – or – ❏ Visit the HP Web Site: http://www.hp.com/support 2. Follow the instructions on the screen to identify your notebook and access the ROM update you want to download. 3. At the download area: a.
Software Updates and Recoveries Installing a ROM Update ROM installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed: 1. Open Windows Explorer. To open Windows Explorer from the Start button, select Start > All Programs > Accessories > Windows Explorer. 2. In the left pane of the Windows Explorer window, select My Computer and then your hard drive designation.
Software Updates and Recoveries 2. Follow the instructions on the screen to identify your notebook and access the SoftPaq you want to download. 3. At the download area: a. Write down the date, name, or other identifier of the SoftPaq you plan to download. (You may need this information to locate the update later, after it has been downloaded to the hard drive.) b. Follow the online instructions to download the SoftPaq to the hard drive. 4. When the download is complete, open Windows Explorer.
Software Updates and Recoveries System Restore Points System restore is an operating system feature that enables you to undo harmful changes to your notebook software by restoring your software to an earlier time, called a restore point, when your software was functioning optimally. Restore points are restorable, benchmark “snapshots” of your software, driver, and operating system files.
Software Updates and Recoveries Restoring to a Restore Point To restore the notebook to a restore point: 1. Make sure the notebook is connected to a reliable AC outlet through the AC adapter. 2. Select Start > Help and Support > System Restore. 3. Select Restore my computer to an earlier time, and then follow the instructions on the screen. Repairing or Reinstalling Applications All applications preinstalled or preloaded on your notebook can be repaired or reinstalled by using the Software Recovery disc.
Software Updates and Recoveries Reinstalling Applications from Your Hard Drive To reinstall a preloaded application or utility from your hard drive: » Select Start > All Programs > Software Setup, and then follow the instructions on the screen. (When you are prompted to select the software you want to reinstall, select or clear the appropriate check boxes.) Reinstalling Applications from Discs To reinstall applications from discs: 1.
Software Updates and Recoveries Repairing the Operating System To attempt an operating system repair without deleting your personal data, use the Operating System disc that was shipped with the notebook: 1. Connect the notebook to a power outlet through the AC adapter and turn on the notebook. 2. Immediately insert the Operating System disc into the notebook. 3. Shut down the notebook using the standard shutdown procedure for your operating system.
Software Updates and Recoveries Reinstalling the Operating System Ä CAUTION: To prevent the loss of all of your personal data, back up your data before reinstalling the operating system. Personal data and any software you have installed on the notebook will be lost during the operating system reinstallation process. the reinstallation, you may be prompted for your ✎ During Product Key. Your Product Key is provided on the Microsoft Certificate of Authenticity label affixed inside the battery bay.
Software Updates and Recoveries 8. Press esc to continue installing a new copy of the operating system instead of repairing it. 9. Press enter to set up the operating system. 10. Press C to continue setup using this partition. 11. Select Format the partition using the NTFS file system (Quick) and press enter. Ä CAUTION: Formatting a drive deletes all current files. 12. Press F to format the drive. The reinstallation process begins. This process takes 1 to 2 hours to complete.
Software Updates and Recoveries Updating Reinstalled Software It is strongly recommended that you update all reinstalled software. Depending on the settings you used on your former configuration, some software may have been updated without your knowledge. Use the following update procedures as soon as your notebook is connected to the Internet. ■ To update your operating system and the software included on your notebook, select Start > Help and Support.
15 Notebook Care Å WARNING: Always disconnect the notebook from the wall outlet and disconnect external devices before attempting to clean your notebook or any of its components. Å WARNING: Do not spray liquids on your notebook, display, or keyboard. Liquids and household solvents can permanently damage your notebook’s finish and interior components. Your notebook is designed as a durable product.
Notebook Care ■ Use your notebook only on a solid, flat surface. Make sure that the vents, which cool internal components, are unobstructed. Ä To prevent overheating, do not obstruct the vents. Do not allow a hard surface, such as an adjoining optional printer, or a soft surface, such as fabric or carpet, to block the airflow. ■ If the notebook will be unused for a week or more, turn it off. ■ If the notebook will be disconnected from external power for more than 2 weeks: ❏ Shut down the notebook.
Notebook Care Keyboard Ä CAUTION: Do not use liquids of any kind on the keyboard, because they may permanently damage your keyboard. Do not use a regular vacuum cleaner to clean the keyboard, because you may deposit normal household debris on the surfaces, rather than remove it. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys.
Notebook Care Display Ä CAUTION: Never spray water, cleaning fluids, or chemicals on the screen. Doing so can permanently damage your notebook. To remove smudges and lint, frequently clean your display with a soft, damp, lint-free cloth. If the screen requires additional cleaning, use an antistatic screen cleaner or premoistened antistatic wipes. TouchPad Grease and dirt on the TouchPad can cause your cursor to jump around on the display screen.
16 Travel and Shipping Preparation for Travel and Shipping To prepare the notebook for shipping or traveling: 1. Back up your work. 2. Remove all CDs, DVDs, diskettes, discs, PC Cards, ExpressCards, and digital cards. 3. Turn off and disconnect all external devices. 4. Turn off the notebook. 5. If the notebook will be disconnected from an external power source for more than 2 weeks, remove all battery packs and store them in a cool, dry place. 6.
Travel and Shipping ■ Do not expose the notebook or diskettes to a magnetic security detector. ❏ The security device that examines carry-on items placed on a conveyor belt uses x-rays and is safe for the notebook and diskettes. ❏ The walk-through security device and the handheld security wands are magnetic and may damage the notebook or diskettes. ■ If you plan to use the notebook during a flight, check with the airline in advance. In-flight notebook use is at the discretion of the airline.
17 Specifications Operating Environment The operating environment information in the following table might be helpful if you plan to use or transport the notebook in extreme environments. Factor Metric U.S. Operating 10°C to 35°C 50°F to 95°F Nonoperating -20°C to 60°C -4°F to 140°F Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95% Operating (14.7 to 10.1 psia) -15 m to 3,048 m -50 ft to 10,000 ft Nonoperating (14.7 to 4.
Specifications Rated Input Power The power information in this section might be helpful if you plan to travel internationally with the notebook. The notebook operates on DC power, which can be supplied by an AC or a DC power source. Although the notebook can be powered from a stand-alone DC power source, it is strongly recommended that the notebook be powered only with an AC adapter or DC power cord supplied with or approved for your notebook.
Specifications Expansion Port Input/Output Signals (Select Models Only) The expansion port signal information in this section may be helpful if you plan to use an optional notebook docking device that connects to the expansion port 2 on your notebook (select models only). For the location of the expansion port 2, refer to “Left-Side Components” in Chapter 1, “Component ID.” your notebook has an expansion port 2, it has only one ✎ Ifexpansion port.
Specifications The following table identifies the input and output signals supported by the expansion port 2 (select models only) on your notebook. ✎ Not all docking devices will support these features. Feature Support USB 2.
Index 1394 port 1–12 A AC adapter 1–18 adapter, modem 10–3 administrative password. See passwords administrator password 12–4 aircraft adapter 2–15 airport security devices 5–2, 16–2 altitude specifications 17–1 antennae, wireless 1–8 antivirus software 12–11 applications key, Windows 1–2 applications, reinstalling or repairing 1–19 applications.
Index bays battery 1–17 hard drive 1–17 See also compartments BIOS (basic input/output system) 14–2 See also ROM BIOS information, displaying 12–2, 14–3 BIOS version 14–3 Bluetooth interference with standby and hibernation 2–6 overview 11–1, 11–10 software 11–10 Bluetooth label 1–20 boot order preferences 13–4 buttons display release 1–9 mute 1–6 power/standby 1–4, 2–12 Quick Launch 1–5, 3–14 TouchPad 1–3, 3–2 volume 1–6, 4–1 wireless 1–6, 11–2, 11–12 See also battery pack release latch; display switch; ke
Index country-specific modem adapter 1–18, 10–3 critical low-battery condition 2–17 Customer Care 1–19, 16–2 D device disabling 12–10 device security 12–10 dial tones 10–6 dialing settings 10–5 digital cards disabling 7–4 inserting 7–2 Memory Stick (MS) 7–1 Memory Stick Pro (MSP) 7–1 MultiMediaCard (MMC) 7–1 removing 7–3 restarting 7–4 Secure Digital (SD) Memory Card 7–1 Secure Digital Input/Output (SD I/O) 7–1 SmartMedia (SM) card 7–1 supported 1–13 xD-Picture Card (XD) 7–1 Digital Media Slot 1–13 displa
Index enablers, PC Card 6–1, 6–6 environmental specifications 17–1 ESD (electrostatic discharge) 5–2 expansion port 2 17–3 ExpressCard configuring 6–6 identifying 6–5 inserting 6–6 removing 6–8 ExpressCard slot 1–13 inserting ExpressCard 6–6 removing ExpressCard 6–8 ExpressCard slot cover 6–6 external monitor port 1–12, 1–15 external numeric keypad 3–16 F firewall software 12–13 flash memory card.
Index initiate QuickLock 3–10 initiate standby 2–8, 2–11 open Internet Explorer 3–8 open print options window 3–8 Quick Reference 3–6 switch image 3–8 hotkeys identifying 3–5 identifying function keys 1–2 procedures 3–7 Quick Reference 3–6 using with external keyboard 3–7 hotspots 11–1 HP administrator password 12–4 HP password 12–4 HP password guidelines 12–5 hub, USB 9–2 humidity specifications 17–1 I IDE (Integrated Drive Electronics) drive light 1–10 identifying components bottom 1–16 front 1–9 left-s
Index L labels 1–19 Microsoft Certificate of Authenticity 1–19 Service Tag 1–19 wireless certification 1–20 WLAN 1–20 language, changing in Setup utility 13–2 latch, battery pack release 1–17 See also buttons; display switch lights battery 1–10, 2–15, 2–17 caps lock 1–7 IDE drive 1–10 mute 1–7 num lock 1–7, 3–15 power button 1–7 power/standby 1–7, 1–10 wireless 1–7, 11–2, 11–12 lock, security cable 1–15, 12–14 low-battery condition 2–17 M media.
Index N P network cable 1–11 network jack connecting 10–7 identifying 1–11 Network Service Boot 13–4 Norton AntiVirus 12–11 notebook model, family, type, and serial number 3–7 notebook product information 14–2 num lock key 3–15 num lock light 1–7, 3–15 numeric keypad.
Index power AC adapter 1–18 connecting 2–1 conserving 2–22 disconnecting 2–1 schemes 2–13 selecting a source 2–2 setting preferences 2–10 travelling tips 16–2 See also battery pack; hibernation; shutdown procedures; standby power connector 1–11 power cord 1–18, 2–1 See also cables Power Meter 2–16 power schemes 2–10 power settings 2–7 power/standby button changing function 2–12 identifying 1–4 setting preferences 2–12 power/standby light 1–7, 1–10 power-on password 12–4, 12–8 product information 14–2 Produ
Index S S/PDIF audio 17–4 scroll lock key 3–7 scroll zone, TouchPad 1–3, 3–2 scrolling preferences 3–4 Secure Digital (SD) Memory Card 7–1 Secure Digital Input/Output (SD I/O) 7–1 security cable lock, connecting 12–14 security cable slot 1–15 security features 12–1 security features on notebook, Computer Setup 12–2 security password 2–11 serial number 1–19, 3–7, 14–2 series, notebook 14–2 Service Tag 1–19 Setup utility changing language 13–2 closing 13–5 default settings 13–4 navigating 13–3 opening 13–2 o
Index software updates overview preparing for 14–2 speakers external 4–3 internal 1–9 specifications operating environment 17–1 rated input power 17–2 SSID 11–7 standby caution 2–3 initiated during critical low-battery condition 2–17 initiating 2–5, 2–8 interference 2–6 overview 2–3 power/standby light 1–10 resuming from 2–8 setting preferences 2–10 stereo speakers external 4–3 internal 1–9 storing notebook 15–1 S-Video devices, connecting 4–4 S-Video support 17–4 S-Video-out jack 1–12, 1–15 switch, displa
Index U updates, software 14–14 USB devices 9–1, 9–2 USB hubs 9–2 USB ports 1–12, 1–14, 9–2 user passwords. See passwords V VCR connecting audio 4–3 connecting video 4–4 vents 1–17 video devices, connecting 4–4 viruses, antivirus software 12–11 voltage converter kit 16–2 volume buttons 1–6, 4–1 volume, adjusting 4–1 W Wi-Fi Protected Access (WPA)-Personal 11–7 Windows administrator password.
