Datasheet

Ports
PortsPorts
Ports USB
USBUSB
USB 6 USB 2.0 (2 front, 4 rear)
Plus 4 additional USB+POWER on some models; 3 @ 12V, 1 @ 24V
Serial
SerialSerial
Serial 2 RS232 individually configurable to power 5V & 12 V. COM1 can be
configured for 5V, 9V, and 12V
Plus 2 additional RS232 on some models via PCI card. Individually
configurable to power 5V and 12V
Parallel
ParallelParallel
Parallel 1
PS/2
PS/2PS/2
PS/2 2
Video
VideoVideo
Video 1
Audio
AudioAudio
Audio 2, line in and line out
NIC
NICNIC
NIC RJ-45
Support for Multi-
Support for Multi-Support for Multi-
Support for Multi-
Monitor*
Monitor*Monitor*
Monitor*
available via HP ADD2 SDVO DVI-D Adapter
* The rp5700 supports normal (or non-reversed) layout (Advanced Digital Display 2) adapter cards
inserted into the SDVO (Serial Digital Video Output) connector on the system board. This connector has
the physical appearance of a PCIe- x16 connector; however, conventional PCIe cards are not supported
in this connector.
Chipset
ChipsetChipset
Chipset Intel Q963 with ICH8-RAID
Processor and
Processor andProcessor and
Processor and
Speed*
Speed*Speed*
Speed*
One of the following
Intel Core2 Duo Processor E6400e (2.13-GHz, 2-MB L2 cache, 1066-MHz FSB)
Intel Pentium Dual-Core Processor E2160 (1.80-GHz, 1-MB L2 cache, 800-MHz FSB)
Intel Celeron Processor 440 (2-GHz, 512-KB L2 cache, 800-MHz FSB)
* Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family,
not across different processor families.
Memory
MemoryMemory
Memory DDR2 SYNCH DRAM NON-ECC MEMORY
DDR2 SYNCH DRAM NON-ECC MEMORYDDR2 SYNCH DRAM NON-ECC MEMORY
DDR2 SYNCH DRAM NON-ECC MEMORY
Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes.
This chart does not represent all possible memory configurations. The Intel Q963 Express chipsets
support non-ECC DDR2 PC2-5300 (667-MHz)
HP recommends dual-channel symmetric configurations for maximum performance.
HP recommends dual-channel symmetric configurations for maximum performance.HP recommends dual-channel symmetric configurations for maximum performance.
HP recommends dual-channel symmetric configurations for maximum performance.
For best performance, add the same amount of total memory to each channel and do not mix speeds.
For dual-channel symmetric performance, the total amount of memory in each channel must be equal. If
speeds are mixed, speed will default to the slowest DIMM.
512-MB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (1 x 512 MB)
512-MB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (2 x 256 MB)
1-GB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (1 x 1 GB)
1-GB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (2 x 512 MB)
2-GB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (1 x 2 GB)
2-GB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (2 x 1 GB)
3-GB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (3 x 1 GB)
4-GB DDR2 Synch DRAM PC2-5300 (667-MHz) Non ECC (4 x 1 GB)
QuickSpecs
HP rp5700 Point of Sale (POS) System or HP rp5700
HP rp5700 Point of Sale (POS) System or HP rp5700HP rp5700 Point of Sale (POS) System or HP rp5700
HP rp5700 Point of Sale (POS) System or HP rp5700
Business Desktop PC
Business Desktop PCBusiness Desktop PC
Business Desktop PC
Standard and Configurable Components
DA - 12703 Worldwide — Version 3 — June 7, 2007 Page 5