User's Manual

Comments • Executable when initiated: Yes
• Coupled Command: No
• Enabling or disabling the input port while the digitizer is taking readings
(initiated) may cause unexpected reading values due to relay settling during the
transition.
• Related commands: SENSe:FUNCtion "VOLTage:DC <port>"
• *RST Condition: INPut<port >:STATe ON
Example Disabling input port 2
INP2 OFF Disconnect input port 2 from the
measurement signal path
INPut[< port >][:STATe]
INPut[< port >] Subsystem Command Reference 235