User's Manual

84 CHAPTER 3: MAIN WINDOW
VLANs
This tab, as shown in Figure 16
, displays the following:
■ VLAN IDs — whether to list VLANs that could not be correlated with
each other but that have the same VLAN ID as a single VLAN or
multiple VLANs. They will be listed as multiple VLANs by default.
Figure 16 VLAN IDs
■ VLAN membership — whether to include devices in a VLAN based
only upon their configuration or based upon the network topology as
well. Devices are included in VLANs based upon both their
configuration and the network topology by default.
For further information on the VLANs tab see “
Options Dialog Box” on
page 521
.
Retry/Timeout
This tab, as shown in Figure 17
, allows you to set the default number of
retries and the timeout period to use for various types of request when
communicating with devices for discovery and monitoring purposes.