User's Manual

Restore Components 787
Restore
Components
This section describes how to use the Restore feature of 3Com Network
Director.
Device Restore
Wizard
You can apply a saved backup to either the device from which the backup
was taken or to a replacement device that has the same physical
configuration.
The Device Restore Wizard must be launched against the selection of a
single device in the current map. The selected device will be the target of
the Restore operation.
You can select from the saved backups that have the same physical
configuration as the target device. If there are no saved backups
associated with the target device because it is a replacement device, you
will be given the opportunity to specify the device that this is a
replacement for.
The Device Restore Wizard is launched from Device > Restore.
No Backups Found Step
When you launch the Device Restore Wizard against a target device that
has no backup files associated with it, the wizard shows the No Backups
Found step as shown in Figure 429
. The wizard will ask you whether the
target device is a replacement for another device.