User's Manual

760 CHAPTER 18: NBX SUPPORT
Figure 419 Modify NBX Call Processor
The Add NBX Call Processor and Modify NBX Call Processor dialog boxes
display the following settings:
■ IP Address: The IP address of the NBX Call Processor. This entry must
be a valid IP address.
■ Username: The NetSet administrator username for the NBX Call
Processor.
■ Password: The NetSet administrator password for the NBX Call
Processor.
Clicking Cancel will discard the details, clicking OK will validate the details
in the step, as shown.
You can add NBX Call Processor details to your list even if the IP address
of the NBX Call Processor is not in the IP address ranges for this discovery.
3Com Network Director will only attempt to communicate with NBX Call
Processors which it considers to be part of the current network discovery.
Properties dialog box The 3Com Network Director Properties dialog box provides detailed
information about the NBX phone equipment on your network including
the NBX Call Processors, Analog Terminal Adapters and phones.
Refer to the “
Viewing Device Details” chapter, on page 229 for more
details on the Properties dialog box.