User's Manual

758 CHAPTER 18: NBX SUPPORT
Figure 417 NBX Call Processors Step of the Network Discovery Wizard
The NBX Call Processors step displays the following settings:
■ Add/Modify/Remove NBX Call Processors: the table allows you to add
details for individual NBX Call Processors on your network. By default,
this table is empty.
■ Click on Add to specify the login details for a new NBX Call
Processor.
■ Click on Modify to specify the login details for the selected NBX
Call Processor in the table.
■ Click on Remove to remove the login details for the selected NBX
Call Processor in the table.
■ Use the factory defaults: Select this option if you do not know the IP
address of the NBX Call Processors on your network, and the NBX Call
Processors on your network use the factory default
username/password.
■ Custom: Select this option if you do not know the IP address of the
NBX Call Processors on your network, and all NBX Call Processors use
the same custom username/password.
During the discovery process, when 3Com Network Director finds an NBX
Call Processor on the network, it will try the following
username/password combinations: