User's Manual
Examples 737
Figure 399 Network Discovery Wizard - Subnet Added
17 Click Add to launch the Add Subnet dialog box again.
18 In the Add Subnet dialog box enter the subnet address and mask of the
subnet associated with the second VLAN.
19 Select the Discover custom ranges: radio button.
20 Click OK to add the new range to the list of ranges to discover on the
subnet.
21 Edit the Start IP address so that it is set to the IP address of the database
server.
22 Edit the End IP address so that it too is set to the IP address of the
database server.
23 Note that the Use defaults from Tools > Options dialog box option is
already cleared and the values in the retries and ms timeout fields are
already set to the numbers of retries and timeout periods that you
determined for the various request types.
24 Click OK to add the subnet to the list of subnets to discover.
25 Repeat steps 17 – 24 for the third VLAN, setting the Start and End IP
addresses to the IP address of the NBX call processor.
26 Click Next to move onto the Monitor Core Devices and Links step.
27 At the Monitor Core Devices and Links step, select the No option. You
will configure the monitoring later according to the requirements of the