User's Manual

Examples 645
9 Click Next to display the next step of the wizard. If the Resource Warning
screen is displayed then you may wish to resolve the resource warning
before proceeding. Refer to “
Resource Warnings” on page 657 for more
information.
10 When you reach the Configuration Summary step, click Finish to apply
the updated configuration to the supported 3Com devices in the map.
Prioritizing a Video
Conferencing
Application
The CEO is holding a video conference with direct reports over the
corporate intranet. Previous conferences like this have been affected by
network congestion causing intermittent loss of video and audio. You
decide to prioritize the traffic belonging to the video conferencing
application to prevent similar disruption to this conference.
You have determined that your video conferencing software uses UDP
port 2001 for audio, UPD port 2002 for video and UDP port 2003 for
signaling.
1 In the Introduction step, click Next. The wizard will analyze the devices in
the current map and display the Configuration Type step as shown in
Figure 349
.
2 Select the Network-wide configuration radio button and select Next to
display the Servers step.
3 Click Next to display the Applications step as shown in Figure 353
below.