User's Manual

642 CHAPTER 15: PRIORITIZING NETWORK TRAFFIC
5 Click Next to show the Servers step in the wizard and continue selecting
Next until the Configuration Summary step is shown. If the Resource
Warning screen is displayed then you may wish to resolve the resource
warnings before proceeding. Refer to “
Resource Warnings” on page 657
for more information.
6 When you reach the Configuration Summary step, select Finish to apply
the updated configuration to the supported 3Com devices in the map.
Prioritizing Traffic To
and From a SAP
Server
You have noticed that during periods of network congestion, several of
your users have had difficulties accessing your SAP server. As this is
having an impact on your business, you wish to prioritize traffic to and
from the server to prevent these difficulties from arising.
1 In the Introduction step, select Next. The wizard will analyze your
network and display the Configuration Type step as shown in Figure 349
.
2 Select the Network-wide configuration radio button and select Next to
show the Servers step as shown in Figure 350
.
Figure 350 Servers - Prioritizing Traffic To and From a SAP Server Example
3 To add the SAP server to the list of servers, select Setup Servers from the
Servers step to display the Setup Servers dialog as shown in Figure 351
.