User's Manual

620 CHAPTER 14: BULK CONFIGURATION
1
The attributes in this feature that rely on RADIUS authentication are not
supported because the device does not support RADIUS authentication.
2
The attributes in this feature that relate to Rapid Spanning Tree Protocol
are not supported because the device does not support the Rapid
Spanning Tree Protocol.
3
The link state trap attribute of the port administration feature is not
supported on the Switch 4300 device.
4
A license key is required for the SuperStack 3 Switch 4400 device to
allow the feature to be fully supported on this device.
5
3Com Network Director is unable to configure the non-default user
account on the Switch 4005 device. This account must be configured
manually on the device, see the Switch 4005 User Guide for details of
how to configure the non-default user account.
Switch 4300 Switch features: System information, Trap destinations,
Spanning tree
2
, IGMP.
Port features: Spanning tree
2
, Administration
3
,
Autonegotiation.
Switch 4400 Family Switch features: User accounts
4
, Secure Shell (SSH)
4
,
Access rights, Trusted IP
4
, RADIUS servers
4
, System
information, Trap destinations, Spanning tree, IGMP,
Broadcast storm control.
Port features: Security
4
, Spanning tree, Administration,
Autonegotiation, LACP.
Switch 49xx Family
Switch 40x0 Family
Switch features: User accounts, Access rights, RADIUS
servers, System information, Trap destinations, Spanning
tree, IGMP, Broadcast storm control.
Port features: Spanning tree, Administration,
Autonegotiation, LACP.
Switch 4005 Switch features: User accounts
1, 5
, Access rights, System
information, Trap destinations, Spanning tree
2
, IGMP.
Port features: Security
1
, Spanning tree
2
, Administration,
Autonegotiation.
Device Family Supported Features