User's Manual

618 CHAPTER 14: BULK CONFIGURATION
Figure 342 Selection Editor Dialog Box – Port Selection
6 Click the Add by Type button, and use the Add Ports By Type dialog box
to add all of the edge ports belonging to the highlighted devices to the
port selection. It is possible to expand the devices and units shown in the
selection summary tree to verify that the port selection is as expected.
7 Click the Save As button from the Selection Editor dialog box and save
the current port selection with a suitable filename, for example Hot-desk
ports. The selection will be ready for re-use should the need arise to make
further changes to the ports these users are connected to.
8 Click OK in the Selection Editor dialog box, and then click OK in the
Configuration Editor dialog box to run the bulk configuration of the
selected ports.
9 In the Schedule Configuration dialog box, select the Start the task now
radio button to start the bulk configuration operation immediately, and
click OK.