User's Manual

Examples 617
To do this:
1 Launch the Configuration Editor dialog box using the Switch Ports option
from the Device > Configure menu.
2 Select the Security feature in the configuration summary tree and enable
the security mode in the feature pane, as shown in Figure 341
.
Figure 341 Configuration Template Editor – Port Security
3 Select the user-login security mode.
4 Click the Edit Selection button in the Configuration Editor dialog box to
launch the Selection Editor dialog box, and click the Add Device button in
the Selection Editor box to launch the Find Device dialog box. Select the
Find by type option and select the Switch 4400 device type from the drop
down list, and click Find. Highlight the Switch 4400 devices that provide
the network connections for the new hot-desking area, and click OK to
add the devices to the selection of devices to be configured.
If the selection made in the previous configuration operation was saved,
then it can be opened again for use here.
5 Highlight all of the devices in the selection summary tree, as shown in
Figure 342
.