User's Manual

610 CHAPTER 14: BULK CONFIGURATION
Figure 335 Autonegotiation Panel
The settings for each of the autonegotiation parameters will only be
applied as part of the configuration template if the associated checkbox is
checked. In addition, the Advertised Capabilities parameter will only be
enabled if the Mode check box is checked and the Mode parameter is set
to Auto.
The Autonegotiation feature places restrictions on the values which can
be set for the following parameters.
Table 96 Autonegotiation Parameter Restrictions
This configuration feature panel will be considered invalid if the
advertised capabilities list box is enabled, and the Flow Control option is
selected, but no Full Duplex entries are selected.
Parameter Restriction
Mode The mode of operation for the port can be one of: auto,
10HD, 10FD, 100HD, 100FD, or 1000FD.
Advertised
Capabilities
The list of operational modes that the port advertises
during autonegotiation can be any combination of: 10HD,
10FD, 100HD, 100FD, 1000FD, and Flow Control.