User's Manual

Components 597
Figure 323 Trusted IP Hosts Panel
The Trusted IP Mode will only be applied as part of the configuration
template if the associated checkbox is checked. Also, the trusted IP hosts
address list will only be applied as part of the configuration template if
the Trusted IP mode is set to Enabled.
Each entry in the list of trusted IP hosts defines the IP address and
associated subnet mask of a specific trusted device or range of devices.
The access methods for the currently selected trusted IP host address are
shown on the right of the panel.
In a new configuration template the list contains a single default entry
containing the IP address of the 3Com Network Director management
station with a subnet mask of 255.255.255.255.
Trusted IP addresses can be added to the list, one at a time, using the Add
button to launch the Add Trusted Address dialog box. A maximum of
sixteen entries can be added to the list. The IP address, subnet mask and
access settings for any of the entries in the list can be modified using the
Edit button to launch the Edit Trusted Address dialog box. Any of the
trusted addresses can be removed by selecting the entry in the list and
clicking Remove.