User's Manual

Components 587
The bulk configuration operation will not attempt to configure any ports
that are not marked as selected by a green tick.
For convenience, ports can also be added to the selection according to
their type, e.g. all connected ports, using the Add Ports by Type dialog
box.
Figure 317 Add Port by Type Dialog Box
To add ports to the selection according to their type, first highlight the
devices in the tree that contain the ports to be added. Then click the Add
by Type… button, which will display the Add Ports by Type dialog box,
shown in Figure 317
above. Now choose the type of ports to add to the
selection, by clicking on the appropriate type, followed by the OK button.
The dialog box will now be dismissed, and all ports belonging to the
highlighted devices that match the chosen type will be added to the
selection.The tree will be updated to show a green tick next to each port
that was selected. Any ports that were previously selected will not be
removed.