User's Manual

584 CHAPTER 14: BULK CONFIGURATION
Loading and Saving Configuration Templates
The configuration template currently displayed in the Configuration
Editor dialog box can be saved by choosing the Save As… button
beneath the configuration summary tree. Use the file chooser dialog box
to find the location in which the configuration template is to be stored
and then enter a name for the new file. The default directory will
correspond to the type of configuration template being saved, and the
default file extension will be .cfg.
A previously saved configuration template can be loaded by selecting the
Open… button beneath the configuration summary tree. Use the file
chooser dialog box to locate the configuration template to be opened.
It is only possible to load configuration templates that are appropriate for
the type of device or port chosen to be configured. For example, if the
Configuration Editor dialog box was launched from the Device >
Configure > Switch Devices menu option, then it will only allow Switch
Device configuration templates to be opened.
Selection Editor
Dialog Box
The Selection Editor dialog box allows the user to view and modify the
selection of devices or ports that a configuration template is to be applied
to, and is launched using the Edit Selection button on the Configuration
Editor dialog box.
Figure 316 Port Selection Editor