User's Manual

566 CHAPTER 13: VLAN MANAGEMENT
Figure 308 Selecting the Link
The first wizard stage would display the two switches that are to be
configured, and selecting either switch would list the port on that switch
that is to be configured. You would click Next at this wizard stage as no
additional ports need to be added. The next wizard stage would initially
display the VLANs currently configured on the two switch ports. This
would likely be just the default VLAN, ID 1. To specify that the ports
should also become tagged members of the VLANs with IDs 2-6, 10-12,
you would check the corresponding check boxes in the list in the centre
of the dialog box: