User's Manual

534 CHAPTER 13: VLAN MANAGEMENT
Figure 282 VLAN Configuration Report Entry
If a switch has only one configured VLAN and all of its ports are untagged
members of this VLAN, then this switch is considered to be
VLAN-unaware. It is considered to still have the factory-default VLAN
configuration i.e. the VLAN configuration has not been changed. The
switch is not considered to be actively using VLANs and is not displayed in
the VLAN Configuration report.
The report will be empty if there are no VLAN-aware devices on the map,
or within the current selection, depending on the option chosen.
Misconfigurations and Optimizations Report
After discovering all the devices and links on your network, 3Com
Network Director checks for any misconfigurations or potential
optimizations. If there are any, these are reported in the
Misconfigurations & Optimizations Report. For details of this see
“
Misconfigurations and Optimizations Report” on page 868. There are a
number of VLAN-related misconfigurations that can be reported: