User's Manual

Components 533
VLAN configuration report
An HTML report can be generated that will list details of the VLANs
configured on the switches on your network map. The report can either
be generated for all of the switches on your map, or for selected switches
only.
To generate the report for selected switches only:
1 Select the switches on the map
2 Select the Tools > Reports menu option,
3 Select the VLAN Configuration report in the Reports dialog box
4 Click the Generate Report button.
You are then presented with a dialog box allowing you to choose
whether to generate the report for the selected switches or for the whole
map:
Figure 281 Generate Report Dialog Box
For each switch with more than one VLAN configured, the report lists
details for each VLAN configured on the switch:
■ The VLAN name.
■ The VLAN ID.
■ Any L3 protocol information configured for the VLAN.
■ The ports that are members of the VLAN:
■ Whether these ports are tagged or untagged.
■ Whether these ports are connected.
■ What these ports are connected to.
See below for an example entry in the VLAN Configuration report: