User's Manual

494 CHAPTER 12: CONFIGURING SINGLE DEVICES
Viewing Connected
Ports using Device
View
You have a Switch 3300 on your network and you wish to view
connected ports on it using Device View:
1 Find the appropriate Switch 3300 device in the 3Com Network Director
network map. This can be done using the Find dialog box if needed.
2 Select the device and right-click on it to launch the menu.
3 Select Device > Administration > Device View.
Device View will be launched and a graphical representation of the device
will be displayed. Connected ports have a connected link annotation over
them. If the port is ‘up’ it will be green in color.
Registering 3Com
Devices for Warranty
You have just bought several 3Com devices and installed them on your
network. You now want to register all these devices for warranty using
3Com Network Director.
1 Launch the Options dialog box using Tools > Options and make sure that
in the General tab, the Show the Device Warranty dialog box after a
network discovery operation option is selected. If it is de-selected, click
on the check box to select it.
2 Re-discover the network on which the new 3Com devices are installed.
This can be done by selecting Tools > Network Discovery in the main
3Com Network Director window.
3 When the discovery is complete, you will get a message as shown in
Figure 257
.
Figure 257 Registering Devices for Warranty - Example
4 Click OK to launch the Device Warranty wizard.