User's Manual

476 CHAPTER 12: CONFIGURING SINGLE DEVICES
Figure 239 IP Ping Console Dialog Box
The dialog box pre-fills the command line text box with the command
‘ping’ followed by the IP address of the device you have selected. The
command line is provided so that you can specify additional command
line options to the ping command. When you click Start, the ping
command is run and its output is displayed in the Output window.
Trace Route The Trace Router feature enables you to run the Windows system ‘tracert’
utility. This utility lets you trace the router path from the management
station to the device you’re interested in. If the device has more than one
IP interface, the Trace Route menu will contain submenus for each IP
address the device has.
When you select a device and click on Trace Route... from the right-click
menu, a console dialog box is launched as shown in Figure 240
: