User's Manual

Getting Started 41
If you save an upgraded map from within 3Com Network Director you
will be unable to subsequently load it back into 3Com Network
Supervisor.
Using saved 3Com Network Supervisor files
You cannot access the following 3Com Network Supervisor files from
within 3Com Network Director:
■ Saved device backup files, generated using the Device->Backup...
dialog
■ Previously generated reports, visible through the History tab of the
Tools->Reports... dialog
The Device Warranty feature
If you have previously registered devices on your network for warranty
using the Tools->Device Warranty... feature in 3Com Network Supervisor,
these devices will not be remembered by 3Com Network Director. After
discovering your network, you will be prompted by 3Com Network
Director to register every applicable device, whether or not already
registered with 3Com.
However, any devices already registered with 3Com will be ignored by the
3Com warranty server - re-registering your devices is harmless.
You will only have to do this once - 3Com Network Director will
remember which devices you have registered using 3Com Network
Director itself.