User's Manual

Components 411
Manual Upload Toggles Manual Upload on/off. If
Manual Update is enabled, data is not
retrieved from the device unless the
Update Data menu option on the
Update menu, or the Manual Update
button on the toolbar is selected. The
Auto Upload and Manual Upload
options are mutually exclusive.
Line Width > Thick Lines Sets the thickness of the lines
displayed on the graph to the thick
setting.
Line Width > Thin Lines Sets the thickness of the lines
displayed on the graph to the thin
setting.
Table control Launches the Table Control dialog
box, allowing you to control the
number of table rows displayed.
See “
The Table Control Dialog Box”
on page 416
for more information.
Graphed values > Absolute Configures the graph to display the
absolute values of the retrieved data.
Note that the table always displays the
absolute values of the retrieved data.
This menu option is not available for
history views.
Graphed Values > Delta Configures the graph to display the
delta values of the retrieved data.
Delta values display the difference
between the last two data values
retrieved, and allow you to more easily
view how data is changing over time.
Note that the table always displays the
absolute values of the retrieved data.
This menu option is not available for
history views.
Address Translation > Custom
Name
Sets the address translation level used
for all views in RMONView to Custom
Name. 3Com Network Director will
attempt to display the custom names
corresponding to addresses in the
host and matrix views.
See “Map Item Labels and Address
Translation” on page 175
Menu Item Hot Key Operation