User's Manual

300 CHAPTER 7: MONITORING THE NETWORK
Specifying Monitoring Mode and Poll Rates at the Subnet Level
You can only change the monitoring type and poll rate settings for a
subnet if you are not using automatic monitoring mode for the whole
map.If you are not using the automatic monitoring mode and wish to
change these settings for a particular subnet, open the Monitoring tab of
the subnet’s Properties dialog box:
Figure 140 Monitoring Tab of Subnet’s Properties Dialog Box
By default all subnets will inherit their settings from the Tools > Options
dialog box.In order to change the monitoring mode and poll rates for a
subnet you will need to uncheck the Use defaults from Tools > Options
check box, after which you can set the monitoring mode and poll rates
for the subnet.