User's Manual

Components 289
Figure 131 Component Values Fields
Showing Thresholds
The Display Options section, which is displayed on the right-hand side
when the Data to Graph section is displayed, contains two options for
controlling the display of the graphs: Show threshold for… and Show
plot points.
The Show threshold for… option, when enabled, works in an identical
manner to the Display thresholds option for the Live Graphs window. See
“
Displaying Thresholds” on page 283 for more information. However,
when it is disabled the horizontal dashed threshold lines are not displayed
even if the highest value in the monitor’s history exceeds a threshold
value, although the monitor’s graph line is still colored green, yellow or
red as appropriate.
Note that with this option enabled, any component values the monitor
may have will be automatically disabled, to avoid confusion in the data
being presented. The monitor's thresholds only apply to the main
monitored value, not to the individual component values. De-selecting
the option will re-enable any component values which were automatically
disabled.
Figure 132 Showing Thresholds
Showing Thresholds Not Showing Thresholds