User's Manual

Components 239
Figure 100 Properties Dialog Box for a Supported Device (Stack or Chassis)
Select the unit/slot in the tree to view the properties for that unit/blade.
The tabs available for a unit/slot are shown in Table 41
.
Table 41 Tabs Available for a Unit/Slot
Supported Device
(Single Unit)
If the device is neither a stack nor a chassis device, the tree on the
left-hand side of the dialog box shows the device, the ports, interfaces
and aggregated links on the device, as shown in Figure 101
.
Tab Title Contents
General The system information for the unit/blade, such as type, hardware and
software version, etc.
Custom information for the unit, such as comments.
Addresses The IP and MAC addresses for the unit/blade.