User's Manual

186 CHAPTER 5: WORKING WITH THE MAP
table lists each menu item that may appear in the menu and the
associated operation.
Table 28 Pull-Right Menu Options from the Map Background.
Shortcut Symbols
You may have two devices on your network that are physically linked to
each other, but that do not exist on the same subnet. When you are
viewing the devices in your network grouped by subnets, there is no
submap in which both devices are visible.
However, provided one of the devices is visible in the submap, 3Com
Network Directorcan still draw the physical link between the two devices
using a shortcut symbol to represent the other device.
The shortcut icon used is similar to the normal device icon, but is
grayed-out, and has an arrow displayed in the lower left-hand corner. The
submap that the device belongs to displays in parentheses after the
device's label.
Menu Item Operation
Zoom in Zooms in towards the map, centering the current selection in
the display if applicable. See “
Navigation” on page 182 for
more information.
Zoom out Zooms out from the map. See “Navigation” on page 182 for
more information.
Fit to page Centers the map on the display and zooms in or out as
necessary so that the entire map is visible in the display. See
“Navigation” on page 182 for more information.
Relayout Performs an automatic relayout of the map items in the
currently viewed submap. See “
Automatic Relayout of Maps”
on page 201
for more information.
Find Launches the Find dialog box. This dialog box allows you to
find items in the map by various attributes such as Name, IP or
MAC address, and VLAN. See “Finding Items on Your
Network” on page 192.
Note that the Find dialog box will find items on any submap
within the map, not just within the submap you launched the
Find dialog box from.