User's Manual

Components 185
Figure 65 Up Button
The Go Up action cannot be performed from the top-level map.
■ Enter Submap — Navigates directly to the submap associated with
the subnet or device group being entered. The Enter Submap action
can be performed either by selecting View
> Enter Submap, by
selecting Enter Submap from the right-click menu of a subnet or
device group, or by double-clicking on the icon of a subnet or device
group.
Double-clicking on an Undiscovered subnet will launch the Discovery
wizard, rather than navigating into the subnet.
The Enter Submap action can only be performed when you have a single
discovered subnet or a single device group selected.
In some situations a subnet’s submap will contain subnet icons. Entering
the submap associated with such an icon is equivalent to navigating
sideways in the submap hierarchy. If you navigate to a subnet’s submap in
this way and then navigate up you will arrive at the top-level map, not at
your original submap.
The title bar for 3Com Network Director indicates which submap you are
currently viewing by listing details at the end of the title. The details
shown depends upon the submap currently being viewed, and are as
follows:
Table 27 Title Bar Displays
Pull-Right Menu for Map Background
As noted above, using the pull-right menu on the map background, that
is right-clicking on any area of the map that does not contain an item
produces a pop-up menu. As well as menu items for zooming in and out
of the map other actions are available from this menu. The following
Currently Viewing Text Displayed in Title
Top-level map Entire Network
Subnet’s submap The subnet’s IP address
Device group’s submap The device group’s name