User's Manual

136 CHAPTER 4: DISCOVERING THE NETWORK
Figure 49 Scheduled Tasks
Note that by scheduling a discovery this way you need to have already
populated your map with any subnets you wish to regularly rediscover. A
scheduled discovery cannot be used to discover new subnets. If you
haven’t yet done this then you should consider the second option
(below).
From the Discovery Wizard
If you haven’t yet populated your map with the subnets you wish to
regularly rediscover, the easiest way is to setup the schedule at the same
time you perform your initial discovery.
1 Launch the Network Discovery wizard (e.g. by selecting Tools > Network
Discovery).
2 Step through the wizard as you would normally, ensuring you enter the
subnets you wish to be discovered (and consequently rediscovered during
the scheduled discoveries), and any other fine-tuning you wish to
perform.
3 When you reach the Scheduled Discovery pane
click the Configure
Schedule button.