User's Manual

Components 121
(HTTP) only – they do not support the SNMP protocol. When you access
an NCP device with you Web browser you will be asked for a username
and password. 3Com Network Director uses the same username and
password to obtain information from NCP devices. See “
Key Concepts”
on page 92
. It is likely that you will have modified the username and/or
password from the defaults. Therefore, you will need to specify the new
values here. If you have not modified the username and password, then
leave the default option Use factory defaults selected and click Next to
move to the next step of the wizard.
■ If you only have one NCP on your subnet(s) or you have modified all
NCP devices to use the same username and password, specify the
values by selecting the Custom option and entering the Username and
Password into the fields on this pane.
■ If you have multiple NCP devices and have modified them to use
different usernames and passwords then you will need to add each
one individually to the list of NCPs using the Add button. You need to
provide the IP address of each one individually specified along with the
Username and Password. You can still use the Custom settings to
cover any NCPs which use common settings.
Figure 38 NBX Call Processors Pane