User's Manual

118 CHAPTER 4: DISCOVERING THE NETWORK
Figure 35 Monitor Core Devices and Links Pane
If you choose the Yes radio button then monitoring of the discovered
devices will be started when discovery is complete. By selecting the No
radio button no monitoring on the new devices will start at the end of
discovery. However, you can subsequently enable monitoring on selected
devices from the updated map.
When 3Com Network Director is not operating in automatic monitoring
mode the dialog allows you more advanced control over the monitoring
of the discovered subnets. See “
Controlling Monitoring Type and Polling
Rates” on page 296 for a full explanation of automatic monitoring mode,
other monitoring modes and the full operation of this pane.
Community Strings Pane
This step of the wizard allows you to specify the SNMP community strings
to use for devices while attempting to discover them.